浏览
帮助
登录
此帖子已超过 5 年
Solved!
sercher
54 消息
0
1816
2013年10月27日 20:00
希望详细一些。
回复(4)
cxemc
2 Intern
•
362 消息
这个是中端的,如果是高端的是差不多的在服务器端:
The steps (described later in this section) are:
1. Install the HBA.
2. Set the Unique Device Identifier (UDID) for the storage system.
3. Establish a preliminary single-initiator zone to one SP only.
4. Create Initiator records with the correct properties for the storage
system connection to the HBA(s).
5. Create a storage group on the array.
6. Prepare the LUN(s) for installing the operating system.
7. Use wwidmgr to identify the boot device that will contain Tru64
UNIX to the SRM console.
8. Boot from the CD-ROM and install Tru64 UNIX.
9. Apply any necessary patch kits and driver updates.
10. Update /etc/ddr.dbase with an entry for the VNX series and
CLARiiON storage system.
11. Shut down the server.
12. Complete zoning for this VNX series and CLARiiON system.
13. Create remaining Initiator records for the second SP.
14. Update the wwidmgr information to reflect the complete zoning.
15. Update bootdef_dev information and boot the server.
liulei_it
3.2K 消息
support上就有
support.emc.com/docu5127_Host-Connectivity-Guide-for-HP-UX.pdf?language=en_US
前面自己加上https
Fenglin1
2.1K 消息
1
2013年10月27日 22:00
要HPUX链接到Symm,主要还是看liulei贴出来的那个链接指南,其中还有几点要注意的:
Host Connectivity Guide,链接:https://support.emc.com/docu5127_Host-Connectivity-Guide-for-HP-UX.pdf?language=en_US
至于你准备在Symmetrix里面做什么样的LUN给HPUX,要看Solutions Enabler的手册,链接是:https://support.emc.com/docu35249_Solutions_Enabler_Symmetrix_Array_Controls_CLI_7.3.1_Product_Guide.pdf?language=en_US
楼主你浏览下上面两个文档,有问题再讨论。
2013年10月28日 00:00
还是楼上的大师强啊,如果您有配置SAN SWITCH还得考虑这个配置。
戴尔支持资源
查看更多
查看全部
Top
cxemc
2 Intern
2 Intern
•
362 消息
0
2013年10月27日 20:00
这个是中端的,如果是高端的是差不多的在服务器端:
The steps (described later in this section) are:
1. Install the HBA.
2. Set the Unique Device Identifier (UDID) for the storage system.
3. Establish a preliminary single-initiator zone to one SP only.
4. Create Initiator records with the correct properties for the storage
system connection to the HBA(s).
5. Create a storage group on the array.
6. Prepare the LUN(s) for installing the operating system.
7. Use wwidmgr to identify the boot device that will contain Tru64
UNIX to the SRM console.
8. Boot from the CD-ROM and install Tru64 UNIX.
9. Apply any necessary patch kits and driver updates.
10. Update /etc/ddr.dbase with an entry for the VNX series and
CLARiiON storage system.
11. Shut down the server.
12. Complete zoning for this VNX series and CLARiiON system.
13. Create remaining Initiator records for the second SP.
14. Update the wwidmgr information to reflect the complete zoning.
15. Update bootdef_dev information and boot the server.
liulei_it
2 Intern
2 Intern
•
3.2K 消息
0
2013年10月27日 20:00
support上就有
support.emc.com/docu5127_Host-Connectivity-Guide-for-HP-UX.pdf?language=en_US
前面自己加上https
Fenglin1
2 Intern
2 Intern
•
2.1K 消息
1
2013年10月27日 22:00
要HPUX链接到Symm,主要还是看liulei贴出来的那个链接指南,其中还有几点要注意的:
Host Connectivity Guide,链接:https://support.emc.com/docu5127_Host-Connectivity-Guide-for-HP-UX.pdf?language=en_US
至于你准备在Symmetrix里面做什么样的LUN给HPUX,要看Solutions Enabler的手册,链接是:https://support.emc.com/docu35249_Solutions_Enabler_Symmetrix_Array_Controls_CLI_7.3.1_Product_Guide.pdf?language=en_US
楼主你浏览下上面两个文档,有问题再讨论。
liulei_it
2 Intern
2 Intern
•
3.2K 消息
0
2013年10月28日 00:00
还是楼上的大师强啊,如果您有配置SAN SWITCH还得考虑这个配置。