不适用

VNX3100重启后,不能通过管理IP访问管理界面,IP可以ping通

控制器CPU指示灯蓝橙交替闪烁

标签 (1)
0 项奖励
3 回复数
4 Tellurium

Re: VNX3100重启后,不能通过管理IP访问管理界面,IP可以ping通

那说明你的存储在不断重启,你可以通过串口线进去看看在启动过程中是不是报了什么错误,再根据提示做相应的操作

不适用

Re: VNX3100重启后,不能通过管理IP访问管理界面,IP可以ping通

进入com,检查信息如下:

service@spa spa:~> svc_diag --state=basic

======== Now executing basic state ========

* System Friendly Host Name is: (none)

* Current Software version: NeoBP1_SP1-2.0.3.13400-MAGNUM-RETAIL

* Unisphere IP address: Unable to determine Unisphere IP address in Service Mode

* SSH Status: SSH is disabled on this system.

* Boot Mode: Rescue_Mode

* Post Faults: No faults detected. (code 0x0000)

* Backend Faults: No faults detected. (code 0x0000)

* Boot Control Faults: A user has placed this Storage Processor into Service Mode (USER). (code 0x0905)

* Rescue Reason: A user has placed this Storage Processor into Service Mode (USER). (code 0x0905)

*** WARNING *** This Storage Processor is in Service Mode  *** WARNING ***

*** Run "svc_diag --state=basic" to view more system state information ***

请问,如何把控制器退出服务模式?

0 项奖励
Anonymous
不适用

Re: VNX3100重启后,不能通过管理IP访问管理界面,IP可以ping通

您可以尝试一下命令:

1)svc_rescue_state -c

2)svc_shutdown -r

系统重启后应该就会恢复到正常模式了