PowerPath pseudo bus bus_name cannot be configured. Uninstall and reinstall PowerPath
Error
59
Disk # will not be used because it is a redundant path for disk 5
From disk or volume manager, typically a Warning
100
Path path_name to device_id is dead
Error
101
Path path_name to device_id is alive.
Information
102
device_id is dead.
Error
103
device_id is alive.
Information
104
All paths to device_id are dead.
Error
105
Not all paths to device_id are dead.
Information
106
Killing bus bus_name to storage_system_name port port_name.
Error
108
Volume clariion_volume is unbound.
Information
109
Restored volume clariion_volume to default: SPclariion_storage_processor.
Information
110
Unable to restore volume clariion_volume to default SP.
Information
111
Volume clariion_volume followed to SPclariion_storage_processor.
Information
112
Unable to follow volume clariion_volume to SPclariion_storage_processor.
Warning
113
Trespassed volume clariion_volume to SPclariion_storage_processor.
Information
116
Storage system storage_system_name PowerPath mode disabled.
Warning
200
CgSplit: Change state of consistency_group_name to OfflinePending failed.
Warning
201
CgSplit: Change state of consistency_group_name to Offline failed.
Warning
202
CgDaemon: Unable to determine CG state for consistency_group_name.
Error
204
ConGroup: RDF links for consistency_group_name have been suspended.
Information
205
CgSend8133: Write buffer failed, dev = device_id cmdStatus = status scsi status = status
Error
206
CgSend8133: Read buffer failed, dev = device_id cmdStatus = status scsi status = status
Error
207
CgGetCgState: Write buffer failed, dev = device_id cmdStatus = status scsi status = status
Error
208
CgGetCgState: Read buffer failed, dev = device_id cmdStatus = status scsi status = status
Error
210
CgAddMeta: Duplicate logical device Id device_id.
Warning
211
CgAddMeta: No path to meta-logical device device_id.
Warning
212
ConGroup suspend of consistency_group_name could not be completed from this host. Reason: Failed sending syscalls to the Symmetrix.
Error
213
ConGroup suspend of consistency_group_name could not be completed from this host. Reason: Unable to complete suspend commands within allotted time period.
Error
214
ConGroup: CgRecognize pDevice consistency_group_device_id dev pp_device_id type= device_type_number id= consistency_group_name
Fenglin1
2.1K 消息
0
2013年12月16日 01:00
楼主现在遇到了什么问题？一般情况下，PP在Windows的报错通过EventViewer就可以看到，System的类别，根据EventID不一样，意思也不一样。下面这个表给你参考：
Fenglin1
2.1K 消息
0
2013年12月16日 01:00
Windows就是记录在EventViewer里面，和Windows的日志放在一起的。你在RUN里面敲eventvwr.msc，然后选系统（System），然后用工具过滤Source为PowerPath就能看到相关的日志了。
死机重启，你的Windows的版本是多少？PP的版本呢？死机有什么特别的系统报错吗？eventviewer里面有什么特别的信息？
建议贴出来看看，方便帮你分析！
WinnietherPooh
51 消息
0
2013年12月16日 01:00
Powerpath老死机重启，不知道它的日志存放在哪里，可以查询分析。EventViewer是在图形里查看吧？PP是否有日志文件可以查看？
born_chen
1.8K 消息
0
2013年12月16日 04:00
EventViewer 是WIN系统的事件查看器，通过“计算机管理”能找到。软件的或者系统的信息、日志会这里有记录，LZ可以筛选出和PP有关的最后记录，对比fenglin贴的事件ID去查具体是什么引起的重启。
另外，也可以查下这个事件前（即重启前），发生了什么事件，也有助于定位故障。