开始新对话

此帖子已超过 5 年

Solved!

Go to Solution

3708

2012年9月4日 21:00

redhat 6.2 detect DD890 drivers issue

I create 50 drivers, half drivers map to active 1a  passive 1b, others map to 1b active passive 1a.

Now redhat can't auto detect drivers which mapped to host2, I have to manualy add drivers via this command.

echo "scsi add-single-device 2 0 1 #" > /proc/scsi/scsi "#" is (2,4,6,8...50)

Quesion: how to resolve the problem, server can auto detect all drivers

zone:

host1----1a

host2----1b

HBA card :emulex driver 8.3.5.45.4p

redhat6.2

[root@eslp92202 dp_depot]# lsscsi

[0:0:0:0]    storage HP       P410i            5.14  -      

[0:0:0:1]    disk    HP       LOGICAL VOLUME   5.14  /dev/sda

[1:0:0:0]    mediumx STK      L180             0306  /dev/sch0

[1:0:0:1]    tape    IBM      ULTRIUM-TD3      8711  /dev/st0

[1:0:0:3]    tape    IBM      ULTRIUM-TD3      8711  /dev/st1

[1:0:0:5]    tape    IBM      ULTRIUM-TD3      8711  /dev/st2

[1:0:0:7]    tape    IBM      ULTRIUM-TD3      8711  /dev/st3

[1:0:0:9]    tape    IBM      ULTRIUM-TD3      8711  /dev/st4

[1:0:0:11]   tape    IBM      ULTRIUM-TD3      8711  /dev/st5

[1:0:0:13]   tape    IBM      ULTRIUM-TD3      8711  /dev/st6

[1:0:0:15]   tape    IBM      ULTRIUM-TD3      8711  /dev/st7

[1:0:0:17]   tape    IBM      ULTRIUM-TD3      8711  /dev/st8

[1:0:0:19]   tape    IBM      ULTRIUM-TD3      8711  /dev/st9

[1:0:0:21]   tape    IBM      ULTRIUM-TD3      8711  /dev/st10

[1:0:0:23]   tape    IBM      ULTRIUM-TD3      8711  /dev/st11

[1:0:0:25]   tape    IBM      ULTRIUM-TD3      8711  /dev/st12

[1:0:0:27]   tape    IBM      ULTRIUM-TD3      8711  /dev/st13

[1:0:0:29]   tape    IBM      ULTRIUM-TD3      8711  /dev/st14

[1:0:0:31]   tape    IBM      ULTRIUM-TD3      8711  /dev/st15

[1:0:0:33]   tape    IBM      ULTRIUM-TD3      8711  /dev/st16

[1:0:0:35]   tape    IBM      ULTRIUM-TD3      8711  /dev/st17

[1:0:0:37]   tape    IBM      ULTRIUM-TD3      8711  /dev/st18

[1:0:0:39]   tape    IBM      ULTRIUM-TD3      8711  /dev/st19

[1:0:0:41]   tape    IBM      ULTRIUM-TD3      8711  /dev/st20

[1:0:0:43]   tape    IBM      ULTRIUM-TD3      8711  /dev/st21

[1:0:0:45]   tape    IBM      ULTRIUM-TD3      8711  /dev/st22

[1:0:0:47]   tape    IBM      ULTRIUM-TD3      8711  /dev/st23

[1:0:0:49]   tape    IBM      ULTRIUM-TD3      8711  /dev/st24

[1:0:2:0]    disk    EMC      SYMMETRIX        5874  /dev/sdb

[1:0:2:1]    disk    EMC      SYMMETRIX        5874  /dev/sdc

[1:0:3:0]    disk    EMC      SYMMETRIX        5874  /dev/sdd

[1:0:3:1]    disk    EMC      SYMMETRIX        5874  /dev/sde

[2:0:2:0]    disk    EMC      SYMMETRIX        5874  /dev/sdf

[2:0:2:1]    disk    EMC      SYMMETRIX        5874  /dev/sdg

[2:0:3:0]    disk    EMC      SYMMETRIX        5874  /dev/sdh

[2:0:3:1]    disk    EMC      SYMMETRIX        5874  /dev/sdi

5 Practitioner

 • 

274.2K 消息

2012年9月4日 23:00

Please create two access groups.

Each access group have one initiator, and start the LUN from 0 for each access group.

Group: ESLP92202_VTL101_1

Initiators:

Initiator Alias   Initiator WWPN        

---------------   -----------------------

ESLP92202_05      10:00:00:00:c9:d5:c8:8c

---------------   -----------------------

Devices:

Device Name            LUN   Primary Ports   Secondary Ports   In-use Ports

--------------------   ---   -------------   ---------------   ------------

VTL101_Open changer      0              1a                1b             1a

VTL101_Open drive 1      1              1a                1b             1a

VTL101_Open drive 2      2              1a                1b             1a

VTL101_Open drive 3      3              1a                1b             1a

VTL101_Open drive 4      4              1a                1b             1a

.

.

.

.

.

VTL101_Open drive 25      25              1a                1b             1a

-----------

Group: ESLP92202_VTL101_2

Initiators:

Initiator Alias   Initiator WWPN        

---------------   -----------------------

ESLP92202_06      10:00:00:00:c9:d5:c8:8d

---------------   -----------------------

Devices:

Device Name            LUN   Primary Ports   Secondary Ports   In-use Ports

--------------------   ---   -------------   ---------------   ------------

VTL101_Open drive 26      0              1b                1a             1b

VTL101_Open drive 27      1              1b                1a             1b

VTL101_Open drive 28      2              1b                1a             1b

VTL101_Open drive 29      3              1b                1a             1b

.

.

.

.

.

VTL101_Open drive 50      24              1b                1a             1b

5 Practitioner

 • 

274.2K 消息

2012年9月4日 22:00

Please provide the output of below command from DD CLI:

# vtl group show all

Thank you.

12 消息

2012年9月4日 22:00

Hi Bojianli,

Thanks for your reply. FYI!

~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2012.09.05 07:57:00 =~=~=~=~=~=~=~=~=~=~=~=

vtl group show all

Group: ESLP92202_VTL101_O

Initiators:

Initiator Alias   Initiator WWPN        

---------------   -----------------------

ESLP92202_05      10:00:00:00:c9:d5:c8:8c

ESLP92202_06      10:00:00:00:c9:d5:c8:8d

---------------   -----------------------

Devices:

Device Name            LUN   Primary Ports   Secondary Ports   In-use Ports

--------------------   ---   -------------   ---------------   ------------

VTL101_Open changer      0              1a                1b             1a

VTL101_Open drive 1      1              1a                1b             1a

VTL101_Open drive 2      2              1b                1a             1b

VTL101_Open drive 3      3              1a                1b             1a

VTL101_Open drive 4      4              1b                1a             1b

VTL101_Open drive 5      5              1a                1b             1a

VTL101_Open drive 6      6              1b                1a             1b

VTL101_Open drive 7      7              1a                1b             1a

VTL101_Open drive 8      8              1b                1a             1b

VTL101_Open drive 9      9              1a                1b             1a

VTL101_Open drive 10    10              1b                1a             1b

VTL101_Open drive 11    11              1a                1b             1a

VTL101_Open drive 12    12              1b                1a             1b

VTL101_Open drive 13    13              1a                1b             1a

VTL101_Open drive 14    14              1b                1a             1b

VTL101_Open drive 15    15              1a                1b             1a

VTL101_Open drive 16    16              1b                1a             1b

VTL101_Open drive 17    17              1a                1b             1a

VTL101_Open drive 18    18              1b                1a             1b

VTL101_Open drive 19    19              1a                1b             1a

VTL101_Open drive 20    20              1b                1a             1b

VTL101_Open drive 21    21              1a                1b             1a

VTL101_Open drive 22    22              1b                1a             1b

VTL101_Open drive 23    23              1a                1b             1a

VTL101_Open drive 24    24              1b                1a             1b

VTL101_Open drive 25    25              1a                1b             1a

VTL101_Open drive 26    26              1b                1a             1b

VTL101_Open drive 27    27              1a                1b             1a

VTL101_Open drive 28    28              1b                1a             1b

VTL101_Open drive 29    29              1a                1b             1a

VTL101_Open drive 30    30              1b                1a             1b

VTL101_Open drive 31    31              1a                1b             1a

VTL101_Open drive 32    32              1b                1a             1b

VTL101_Open drive 33    33              1a                1b             1a

VTL101_Open drive 34    34              1b                1a             1b

VTL101_Open drive 35    35              1a                1b             1a

VTL101_Open drive 36    36              1b                1a             1b

VTL101_Open drive 37    37              1a                1b             1a

VTL101_Open drive 38    38              1b                1a             1b

VTL101_Open drive 39    39              1a                1b             1a

VTL101_Open drive 40    40              1b                1a             1b

VTL101_Open drive 41    41              1a                1b             1a

VTL101_Open drive 42    42              1b                1a             1b

VTL101_Open drive 43    43              1a                1b             1a

VTL101_Open drive 44    44              1b                1a             1b

VTL101_Open drive 45    45              1a                1b             1a

VTL101_Open drive 46    46              1b                1a             1b

VTL101_Open drive 47    47              1a                1b             1a

VTL101_Open drive 48    48              1b                1a             1b

VTL101_Open drive 49    49              1a                1b             1a

VTL101_Open drive 50    50              1b                1a             1b

--------------------   ---   -------------   ---------------   ------------

Group: TapeServer

Initiators: None

Devices: None

12 消息

2012年9月5日 00:00

Hi Bojianli

What is the best practice for DD ? it don' t support my old configuration ?

5 Practitioner

 • 

274.2K 消息

2012年9月5日 03:00

It is recommended that you have exactly one initiator per access group.

Linux: When assigning access to Linux machines, always use LUN zero as the first LUN in the group, and use contiguous LUN numbers starting at zero with no gaps in the sequence.  For example, assigning LUNs 0, 1, 2, 3, 4 is correct, assigning LUNs 0, 2, 4, 5 is incorrect. Always use one primary path on the VTL HBA to the tape drives and changer for the access group.

12 消息

2012年9月5日 18:00

Hi Bojianli

Thanks for your support, now the server can detect all the drivers.

1.1K 消息

2012年9月9日 20:00

用中文总结下本帖的问题与回答,以便网友围观。

我有50个驱动器,其中一半映射到了active 1a passive 1b,另一半映射到了1b active 1a passive。现在redhat不能自动识别到映射到host2上的驱动器,我只能用如下命令手动添加。

echo "scsi add-single-device 2 0 1 #" > /proc/scsi/scsi "#" is (2,4,6,8...50)

请问:如何能让redhat自动检测到所有驱动器?

zone:

host1----1a

host2----1b

HBA card :emulex driver 8.3.5.45.4p

redhat6.2

[root@eslp92202 dp_depot]# lsscsi

[0:0:0:0]    storage HP       P410i            5.14  -     

[0:0:0:1]    disk    HP       LOGICAL VOLUME   5.14  /dev/sda

[1:0:0:0]    mediumx STK      L180             0306  /dev/sch0

[1:0:0:1]    tape    IBM      ULTRIUM-TD3      8711  /dev/st0

[1:0:0:3]    tape    IBM      ULTRIUM-TD3      8711  /dev/st1

[1:0:0:5]    tape    IBM      ULTRIUM-TD3      8711  /dev/st2

[1:0:0:7]    tape    IBM      ULTRIUM-TD3      8711  /dev/st3

[1:0:0:9]    tape    IBM      ULTRIUM-TD3      8711  /dev/st4

[1:0:0:11]   tape    IBM      ULTRIUM-TD3      8711  /dev/st5

[1:0:0:13]   tape    IBM      ULTRIUM-TD3      8711  /dev/st6

[1:0:0:15]   tape    IBM      ULTRIUM-TD3      8711  /dev/st7

[1:0:0:17]   tape    IBM      ULTRIUM-TD3      8711  /dev/st8

[1:0:0:19]   tape    IBM      ULTRIUM-TD3      8711  /dev/st9

[1:0:0:21]   tape    IBM      ULTRIUM-TD3      8711  /dev/st10

[1:0:0:23]   tape    IBM      ULTRIUM-TD3      8711  /dev/st11

[1:0:0:25]   tape    IBM      ULTRIUM-TD3      8711  /dev/st12

[1:0:0:27]   tape    IBM      ULTRIUM-TD3      8711  /dev/st13

[1:0:0:29]   tape    IBM      ULTRIUM-TD3      8711  /dev/st14

[1:0:0:31]   tape    IBM      ULTRIUM-TD3      8711  /dev/st15

[1:0:0:33]   tape    IBM      ULTRIUM-TD3      8711  /dev/st16

[1:0:0:35]   tape    IBM      ULTRIUM-TD3      8711  /dev/st17

[1:0:0:37]   tape    IBM      ULTRIUM-TD3      8711  /dev/st18

[1:0:0:39]   tape    IBM      ULTRIUM-TD3      8711  /dev/st19

[1:0:0:41]   tape    IBM      ULTRIUM-TD3      8711  /dev/st20

[1:0:0:43]   tape    IBM      ULTRIUM-TD3      8711  /dev/st21

[1:0:0:45]   tape    IBM      ULTRIUM-TD3      8711  /dev/st22

[1:0:0:47]   tape    IBM      ULTRIUM-TD3      8711  /dev/st23

[1:0:0:49]   tape    IBM      ULTRIUM-TD3      8711  /dev/st24

[1:0:2:0]    disk    EMC      SYMMETRIX        5874  /dev/sdb

[1:0:2:1]    disk    EMC      SYMMETRIX        5874  /dev/sdc

[1:0:3:0]    disk    EMC      SYMMETRIX        5874  /dev/sdd

[1:0:3:1]    disk    EMC      SYMMETRIX        5874  /dev/sde

[2:0:2:0]    disk    EMC      SYMMETRIX        5874  /dev/sdf

[2:0:2:1]    disk    EMC      SYMMETRIX        5874  /dev/sdg

[2:0:3:0]    disk    EMC      SYMMETRIX        5874  /dev/sdh

[2:0:3:1]    disk    EMC      SYMMETRIX        5874  /dev/sdi

回答:

创建两个access groups,每个group有一个initiator,在每个组上重新启动LUN。

Group: ESLP92202_VTL101_1

Initiators:

Initiator Alias   Initiator WWPN       

---------------   -----------------------

ESLP92202_05      10:00:00:00:c9:d5:c8:8c

---------------   -----------------------

Devices:

Device Name            LUN   Primary Ports   Secondary Ports   In-use Ports

--------------------   ---   -------------   ---------------   ------------

VTL101_Open changer      0              1a                1b             1a

VTL101_Open drive 1      1              1a                1b             1a

VTL101_Open drive 2      2              1a                1b             1a

VTL101_Open drive 3      3              1a                1b             1a

VTL101_Open drive 4      4              1a                1b             1a

.

.

.

.

.

VTL101_Open drive 25      25              1a                1b             1a

-----------

Group: ESLP92202_VTL101_2

Initiators:

Initiator Alias   Initiator WWPN       

---------------   -----------------------

ESLP92202_06      10:00:00:00:c9:d5:c8:8d

---------------   -----------------------

Devices:

Device Name            LUN   Primary Ports   Secondary Ports   In-use Ports

--------------------   ---   -------------   ---------------   ------------

VTL101_Open drive 26      0              1b                1a             1b

VTL101_Open drive 27      1              1b                1a             1b

VTL101_Open drive 28      2              1b                1a             1b

VTL101_Open drive 29      3              1b                1a             1b

.

.

.

.

.

VTL101_Open drive 50      24              1b                1a             1b

找不到事件!

Top