未解决
Community Manager
•
7.1K 消息
0
1368
在 esxi(hba 驱动程序)升级后,存储设备 xxx 的路径冗余降级/恢复 (000529717)
知识库文章:000529717
在 esxi(hba 驱动程序)升级后,存储设备 xxx 的路径冗余降级/恢复 (000529717)
主要产品:PowerPath/VE for VMware 6.4
ProductPowerPath/VE for VMware 6.0、PowerPath/VE for VMware 6.1、PowerPath/VE for VMware 6.2、PowerPath/VE for VMware 6.3、PowerPath/VE for VMware 6.4
版本:2 文章类型:中断修复
目标受众:级别 30 = 客户
上次发布时间:2019 年 1 月 30 日星期三 11:06:44
(格林威治标准时间)
摘要:
VCenter 警报:Path redundancy to storage device naa. 600601600xxxxxxxxxxxxxxxxxxxxxxx degraded. Path vmhba2:C0:T2:L14 is down. Affected datastores: Unknown. warning 11/28/2018 5:15:30 AM
Path redundancy to storage device naa.600601600xxxxxxxxxxxxxxxxxxxxxxx (Datastores: Unknown) restored. Path vmhba2:C0:T2:L14 is active again. info 11/28/2018 5:15:30 AM
问题:
环境
主机型号:ProLiant BL460c Gen8
ESXi VMware ESXi 6.0.0 build-10719132
HBA QLogic Corp 2600 系列 16Gb 光纤通道到 PCI Express HBA HBA 驱动程序 2.1.73.0-1OEM.600.0.0.2768847
PowerPath/VE 6.x
Unity 450F 软件 4.3.1.1525703027
症状:
当主机运行 VMware ESXi 6.0.0 build-6921384(或更早版本)时,
Unity LUN 未出错。
升级到 ESXi 6.0 build-10474991 后开始显示错误。 (HBA 驱动程序 2.1.50.0-1vmw.600.3.57.5050593 和更高版本)
摘自 vobd.log
2018-11-28T04:15:30.337Z: [scsiCorrelator] 1176699738791us:
[vob.scsi.scsipath.pathstate.dead] scsiPath vmhba2:C0:T2:L14 changed state from on 2018-11-28T04:15:30.337Z: [scsiCorrelator] 1176687116200us:
[esx.problem.storage.redundancy.degraded]
Path redundancy to storage device naa.600601600xxxxxxxxxxxxxxxxxxxxxx degraded. Path vmhba2:C0:T2:L14 is down. Affected datastores: Unknown.
2018-11-28T04:15:30.441Z: [scsiCorrelator] 1176699843060us:
[vob.scsi.scsipath.pathstate.on] scsiPath vmhba2:C0:T2:L14 changed state from dead 2018-11-28T04:15:30.442Z: [scsiCorrelator] 1176687220485us:
[esx.clear.storage.redundancy.restored]
Path redundancy to storage device naa.600601600xxxxxxxxxxxxxxxxxxxxxxx (Datastores: Unknown) restored. Path vmhba2:C0:T2:L14 is active again.
摘自 vmkernel.log
2018-11-28T04:15:30.336Z cpu19:33424)
Debug:PowerPath:Path vmhba2:C0:T2:L14 CMD 12
Recieved platform Status Success SCSI Status: H:0xc D:0x0 P:0x0 2018-11-28T04:15:30.336Z cpu19:33424)
Debug:PowerPath:Path vmhba2:C0:T2:L14 CMD 12
Recieved platform Status Success SCSI Status: H:0xc D:0x0 P:0x0 2018-11-28T04:15:30.336Z cpu19:33424)
Debug:PowerPath:Path vmhba2:C0:T2:L14 CMD 12
Recieved platform Status Success SCSI Status: H:0xc D:0x0 P:0x0 2018-11-28T04:15:30.336Z cpu19:33424)
Debug:PowerPath:Path vmhba2:C0:T2:L14 CMD 12
Recieved platform Status Success SCSI Status: H:0xc D:0x0 P:0x0 2018-11-28T04:15:30.336Z cpu19:33424)
PowerPath:Path vmhba2:C0:T2:L14 probe failed with Status Success H:0x0 P:0x0 D:0x0 2018-11-28T04:15:30.336Z cpu19:33424)
PowerPath:Path "vmhba2:C0:T2:L14" is changing to dead from on. 2018-11-28T04:15:30.336Z cpu19:33424)
Debug:PowerPath:Path vmhba2:C0:T2:L14 CMD 12
Recieved platform Status Success SCSI Status: H:0xc D:0x0 P:0x0 2018-11-28T04:15:30.441Z cpu19:33424)
PowerPath:Path "vmhba2:C0:T2:L14" is changing to on from dead.
原因: 原因(来自 VMware 的驱动程序团队):
与 ESXi 6.0 P06 相比,ESXi 6.0 EP15 发生了变化:
在报告了 H:0xc 错误的情况下,我们会在驱动程序层重试 命令,而不是在 HBA 层尝试。这样做是为了避免适配器队列已满的情况。
变更: 升级到 ESXi 6.0 build-10474991 后开始显示错误。 (HBA 驱动程序 2.1.50.0-1vmw.600.3.57.5050593 和更高版本)
解决方法: 按照 VMware HCL 安装 HBA 驱动程序 2.1.81.0(或更高版本)和固件 8.08(或更高版本)
注意: 在有 VNX 和 V-max 存储的其他环境中,并且在上述任何版本中都不会出现错误。
主要产品:
PowerPath/VE for VMware 6.4
产品:PowerPath/VE for VMware 6.0、PowerPath/VE for VMware 6.1、PowerPath/VE for VMware 6.2、PowerPath/VE for VMware 6.3、PowerPath/VE for VMware 6.4
系统:
运行 VMware
错误代码:
Path redundancy to storage device naa.600601600xxxxxxxxxxxxxxxxxxxxxxx degraded