How to log in to a Navisphere 6 or Unisphere domain if you forget your login or password How to reset the Navisphere User Interface (UI) password if lost or forgotten How to recover a lost password on a CX3, CX, AX4-5, and VNX Sseries
Forgot password for Navisphere 6 domain and cannot log on. Need to reset security because password was forgotten. Lost password for CX Series, CX3 Series, CX4 Series, AX4-5 Series, or VNX Series storage systems
Product: CLARiiON AX4-5 Series Product: CLARiiON CX SeriesProduct: CLARiiON CX3 SeriesProduct: CLARiiON CX4 SeriesProduct: VNX seriesEMC SW: Navisphere Manager 6.x EMC SW: Unisphere Service Manager (USM)This statement does not apply: EMC SW: Navisphere Express
You must use a serial connection for the following procedure to work:
Establish a PPP connection to one of the storage processors (SPs).
Point your browser to this URL: http:// 192.168.1.1/setup
Click "Create a New Account."
Enter a user name and in the New Password Verification text box, type in the password again.
Click "Restart Management Server."
Note: You may need to restart Management Server on both SPs.
Point your browser to this URL: http:// <IP_address_ of _SP>
Log in to domain using the newly-set username and password.
Note: You also have the option of completely resetting domain security. However, if you select this option, you will destroy ALL domain information, including domain information for the master, other arrays, and portals. If you decide to reset domain security, replace Step 3 with the following:
Click "Reset Security" and confirm. (You must reset security on both SPs.)
Then perform all other steps as described.
Note: If the procedure does not work, connect to the master SP and rerun Steps 1 to 7.
For VNX and CX4 systems, use the following URL: https:// 192.168.1.1/setupIf the AX4-5 storage system is running Navisphere Express, this solution does not apply.
Jeffey1
2 Intern
2 Intern
•
2.8K 消息
0
2016年11月29日 21:00
你好，tony。
你可以使用笔记本通过串口线连接到VNX存储，然后PPP拨号连接到存储设备。具体步骤参考下面KB：
Need to reset security because password was forgotten.
Lost password for CX Series, CX3 Series, CX4 Series, AX4-5 Series, or VNX Series storage systems
Product:
CLARiiON CX SeriesProduct: CLARiiON CX3 SeriesProduct:
CLARiiON CX4 SeriesProduct: VNX seriesEMC SW: Navisphere
Manager 6.x EMC SW: Unisphere Service Manager (USM)This statement does not apply: EMC SW: Navisphere Express
following procedure to work:
password again.
Note: You may need to restart Management Server on both SPs.
Note: You also have the option of completely resetting domain security. However, if you
select this option, you will destroy ALL domain information, including domain
information for the master, other arrays, and portals. If you decide to reset
domain security, replace Step 3 with the following:
Click "Reset Security" and confirm. (You must reset security on both SPs.)
Then perform all other steps as described.
URL: https:// 192.168.1.1/setupIf the AX4-5 storage system is running Navisphere Express, this solution does not apply.