hdssell
3 Argentium

EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

最近买两个台cx400 的串口线,找了根cx200 的DB9-DB9 EXT Null Modem Cable CX200 EMC DELL 9Y998 串口线,用securecrt 工具查看,还是没有输出,请问这两个的串口线是一样的吗?谢谢!!

标记 (1)
0 项奖励
1 个已接受解答

已接受的解答
Roger_Wu
5 Tungsten

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

可以参考知识库文档emc257433,或者附件的图文操作步骤,

First, create the COM port modem


1. Click Start -> Control Panel -> Phone and Modem.
2. Click Modem Tab and click add. 
3. On the Install new Modem Pane, select the "Don't detect my modem" box, then click Next 
4. There will be a pause while it loads the models. Select Communications cable between two computers, then click Next. 
5. Select your COM port, click Next. 
6. Open the Control Panel - Search for "Phone" - select "Phone and Modem."
7. Select Modems Tab -> Communications Cable Between... -> Properties Select Change Settings -> Modem tab - change the "Maximum Port Speed" to 115200.
8. Disable/Enable the connection in device manager.


Next, to set up the PPP connection


1. Click Start -> Control Panel -> Network and sharing center, click Set up a new connection or network (at the bottom).
2. On the next screen, select set up a dial-up connection and click Next.
3. The next screen should list modems and select the "Communications cable between two computers" you created above.
4. On the next screen enter  phone number and username and password (clariion and clariion!) and give it a name.
5. The above connection should now appear in Network Connections, right-click it and select Properties.


Once the connection is set up, modify the settings as follows:

1. In the General tab, click configure and set Max speed to 115200 and select enable hardware flow control.
2. In the Options tab, click PPP settings and check top two boxes are selected (LCP extensions and SW compression).
3. In the Security tab, check Data Encryption is "Optional Encryption (connect even if no encryption)" is set.
4. In the Networking tab, check Internet Protocol Version 4 is selected.
5. In the Networking tab, choose Internet Protocol Properties, then the Advanced button. Uncheck "Use default gateway on remote network."

0 项奖励
13 条回复13
AnkitMehta
4 Beryllium

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

I believe due to language constraint this discussion will be best answered by our experts from International Community at:  https://community.emc.com/community/support/chinese

0 项奖励
Highlighted
RFritz11
3 Zinc

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

Hello,

We have moved your question to the storage hardware support forum of the Chinese Community where your question should receive prompt attention.

Thanks,

Bob.

0 项奖励
Roger_Wu
5 Tungsten

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

串口线是一样的,能描述下从CX400到你SecureCRT这台电脑的连线吗?比如:CX400 <> 串口线 <> 串口线 to USB转接线 <> 笔记本USB接口?如果用了转接线的话,驱动有没有安装?

通常新的笔记本都不带串口了,因此使用转接线的话,需要先安装转接线的驱动。

0 项奖励
Yanhong1
4 Beryllium

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

lz,欢迎回归中文论坛 

0 项奖励
hdssell
3 Argentium

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

我看了下我的hp 的cq40 电脑,硬件管理器里面没有调制解调器这一项,但是我的dell的笔记本有,但是他是windows7 系统的,我想问下 window7 系统的怎么建立ppp连接啊?现在我的串口线能用了。

0 项奖励
Roger_Wu
5 Tungsten

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

可以参考知识库文档emc257433,或者附件的图文操作步骤,

First, create the COM port modem


1. Click Start -> Control Panel -> Phone and Modem.
2. Click Modem Tab and click add. 
3. On the Install new Modem Pane, select the "Don't detect my modem" box, then click Next 
4. There will be a pause while it loads the models. Select Communications cable between two computers, then click Next. 
5. Select your COM port, click Next. 
6. Open the Control Panel - Search for "Phone" - select "Phone and Modem."
7. Select Modems Tab -> Communications Cable Between... -> Properties Select Change Settings -> Modem tab - change the "Maximum Port Speed" to 115200.
8. Disable/Enable the connection in device manager.


Next, to set up the PPP connection


1. Click Start -> Control Panel -> Network and sharing center, click Set up a new connection or network (at the bottom).
2. On the next screen, select set up a dial-up connection and click Next.
3. The next screen should list modems and select the "Communications cable between two computers" you created above.
4. On the next screen enter  phone number and username and password (clariion and clariion!) and give it a name.
5. The above connection should now appear in Network Connections, right-click it and select Properties.


Once the connection is set up, modify the settings as follows:

1. In the General tab, click configure and set Max speed to 115200 and select enable hardware flow control.
2. In the Options tab, click PPP settings and check top two boxes are selected (LCP extensions and SW compression).
3. In the Security tab, check Data Encryption is "Optional Encryption (connect even if no encryption)" is set.
4. In the Networking tab, check Internet Protocol Version 4 is selected.
5. In the Networking tab, choose Internet Protocol Properties, then the Advanced button. Uncheck "Use default gateway on remote network."

0 项奖励
yanzs
3 Cadmium

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

串口线都是一样的吧,没啥区别

0 项奖励
hdssell
3 Argentium

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

串口线驱动安装了,用来调试博科的光纤交换机没有问题,但是按照emc的调试方法建立拨号连接,显示“

已删除 不可使用的设备 com3” ,com3 在博科光纤交换机调试中能找到,没有出现emc文档里面说的communications between two computers,哪位能告诉我是什么原因呢?我用我的hp 和Dell笔记本都试过了,而且都重装了window xp系统,但是朋友的海尔笔记本安装了串口线驱动,却能使用。。。

0 项奖励
hdssell
3 Argentium

Re: EMC CX400 的串口线和cx200 存储的串口线是一样的吗?

转到解答

串口线驱动安装了,用来调试博科的光纤交换机没有问题,但是按照emc的调试方法建立拨号连接,显示“

已删除 不可使用的设备 com3” ,com3 在博科光纤交换机调试中能找到,没有出现emc文档里面说的communications between two computers,哪位能告诉我是什么原因呢?我用我的hp 和Dell笔记本都试过了,而且都重装了window xp系统,但是朋友的海尔笔记本安装了串口线驱动,却能使用。。。

0 项奖励