此帖子已超过 5 年
17 消息
0
3347
MDS-9124 CODE UPGRADE问题
请问:
1、MDS-9124 CODE能否从4.1.3a直接升级到4.2.7e ?
2、CPG升级时第4步如下,这个命令是一行完成还是需要分两行?
switch# install all system bootflash:
kickstart bootflash:
我一行输入执行时出现如下问题,但是升级前兼容性检查已经通过了,很奇怪
sw1# install all system bootflash:m9100-s2ek9-mz.4.2.7e.bin kickstart bootflash:9100-s2ek9-kickstart-mz.4.2.7e.bin
"Failed to process kickstart image".
Version Compatibility check failed. Return code 0x807B0002 (No such file or directory).
3、CPG第5步,都会出现这个提示吗?
Enter y if you wish to continue with the installation. Only select y after confirming that the impact is
acceptable. If you see disruptive for any module and interruption or downtime is not acceptable, DO
NOT answer with y. Answer n and abort the upgrade if there are any concerns with the upgrade.
4、升级完毕需要执行如下操作吗?
sw1#copy run start
sw1#reload"
Jun_Tan
605 消息
1
2012年8月22日 00:00
1、这个建议从两个方面确认,第一从Cisco的release notes;第二参考emc的CPG文档。建议优先考虑emc的CPG文档。
Cisco NX-OS v4.2.7e的release notes在这里:
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/nx-os/release/notes/19964_12.html#wp350532
2、
bootflash:9100-s2ek9-kickstart-mz.4.2.7e.bin 应该是 bootflash:m9100-s2ek9-kickstart-mz.4.2.7e.bin
Cisco MDS系列交换机所有微码文件都是以m开头,敲错文件名字,应该就提示“Version Compatibility check failed. Return code 0x807B0002 (No such file or directory).”
3、这个意思是交换机升级过程可能会重启,选y代表你已经做好重启对业务的影响。一般install all命令会执行Compatibility检查
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
1 yes non-disruptive rolling
2 yes Compatibilityrolling Hitless upgrade is not supported
3 yes disruptive rolling Hitless upgrade is not supported
4 yes non-disruptive rolling
5 yes non-disruptive reset
6 yes non-disruptive reset
如果有disruptive代表你的升级需要重启交换机。
4、
第一个命令多多益善。
第二个是重启交换机,升级完成功后,确认下交换机微码版本(show version)。不建议敲这个命令。
wangchl
17 消息
0
2012年8月22日 00:00
非常感谢Jun_Tan,我觉得是我少输了一个m的原因导致的,过段时间还要在升级另外一台交换机,到时候可以验证一下。
其他的问题也都明白了。
Jun_Tan
605 消息
1
2012年8月22日 00:00
楼主,另外给你补充几个Cisco微码相关文档。
Cisco微码升级文档:
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_2/upgrade/guides/nx-os/upgrade.html
Cisco NX-OS v4.2.7e release note:
http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/nx-os/release/notes/19964_12.html#wp350532
Cisco soft image:
http://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_1_x/1_2_1a/san-os/configuration/guide/SwImage.html
Jun_Tan
605 消息
0
2012年8月22日 00:00
不客气。
如果问题已经解决了,麻烦标记下正确回答或者有用回答哦。
wangchl
17 消息
0
2012年8月22日 01:00
这个我没找到标记的地儿,麻烦版主操作一下吧。多谢。
Jun_Tan
605 消息
0
2012年8月22日 01:00
可以参考 https://community.emc.com/thread/146681 这个帖子。
wangchl
17 消息
1
2012年8月22日 02:00
抱歉,我这电脑没显示这两个选项,你能自己标记吗?我标记不了。
经验证:
1、FW可以从4.1.3a直接升级到4.2.7e
2、之前升级的时候的确少了一个"m"
这次升级很顺利
Jun_Tan
605 消息
0
2012年8月27日 00:00