此帖子已超过 5 年
54 消息
0
2076
Vplex health-check报错“1 RecoverPoint Appliance Cluster(s) appear unhealthy“
我用vplex做health check,看到下面的错误:
RecoverPoint Configuration Health:
Checking RecoverPoint configuration health..................... Error
VPLEX Splitters are installed ....................................................................... OK
All Splitter versions agree ......................................................................... OK
The VPLEX Splitter status ........................................................................... OK
VPLEX management server can reach all attached RecoverPoint Appliance Clusters ...................... OK
All attached RecoverPoint Appliance Clusters are healthy ............................................ Error
1 RecoverPoint Appliance Cluster(s) appear unhealthy:
xx.xx.xx.xx is in error status.
==========================================
我已经做了rpa-cluster remove和add,这个问题还是存在。
请问我还能有什么办法查看到这个错误是怎么造成的。
谢谢!
Roger_Wu
2 Intern
2 Intern
•
4K 消息
0
2015年7月9日 20:00
新部署的系统?之前有正常过吗?VPLEX和RecoverPoint的证书有互相导入过不?
你看看下面KB中的说明是否吻合你的情况:VPLEX: RecoverPoint cluster health status shows error or not ok when VPLEX runs NDU precheck or rountine health check https://support.emc.com/kb/92625
fengli1
54 消息
0
2015年7月9日 21:00
使用过半年的系统,我在vplex端把rp删除过,然后再导入证书,再把rpa加进来。然后rp端把vplex删除,然后加回来,再加splitter。
fengli1
54 消息
0
2015年7月9日 23:00
我的rp是4.1的版本,在splitter哪里没有办法去更新认证。我也找下RP 4.1的guide看下有没有相关说明。
非常感谢!
Roger_Wu
2 Intern
2 Intern
•
4K 消息
0
2015年7月9日 23:00
两边证书都互加了?
Roger_Wu
2 Intern
2 Intern
•
4K 消息
0
2015年7月10日 01:00
恩,KB里有详细步骤,先照着做一遍看看:
Section 1 - Import the RecoverPoint Certificate to VPLEX
Section 2 - ADD VPLEX Certificate in RecoverPoint
fengli1
54 消息
0
2015年7月10日 01:00
看RP 4.1的guide,在RP的register storage里面就可以更新认证,我做了此也没有管用。
准备全部从头来做一次看能不能解决问题。
Roger_Wu
2 Intern
2 Intern
•
4K 消息
0
2015年7月13日 19:00
以CLARiiON、VNX的经验,Lab里的设备经常会出现各种妖怪问题,是要好好检查一番
fengli1
54 消息
0
2015年7月13日 19:00
重新添加了还是不可以,不过另外一个vplex cluster+rp没有问题,先不管了。
谢谢!