hdssell
2 Iron

emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

For an AX150-series storage system:

  1. Power down the storage system by pressing the power button located on the back panel of the storage system. The SP boot LED flashes and the storage system shuts down after several seconds.
  2. Wait for approximately one minute after the storage system powers down completely.    
  3. Press and hold the power button for 4 to 8 seconds, and then release it.  When you release the button, the SP boot LED begins to flash.
  1. When the SP boot LED stops flashing,  the storage system is powered up in an  uninitialized state (it has no management security and you are able to change the management IP addresses).
  2. Run the Navisphere Initialization Utility to create a new username and password.

Note  You may also change the management port IP addresses through the Navisphere Initialization Utility. Once you reboot the storage system, you will not be able to change them unless you repeat the procedure above to uninitialize the storage system.

使用如上重置密码和ip地址的方法,现在打开navisphere storage system wizard ,如何设置本地ip地址呢?? (尝试了192.168.0.10 和192.168.1.10 网段,都找不到ax150)如何重置manage ip地址?谢谢!

标签 (1)
标记 (1)
1 个已接受解答

已接受的解答
Roger_Wu
4 Ruthenium

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

具体步骤看Navisphere Initialization Utility的帮助文档就行了:

initial_utility.jpg

(AX4-5 series only) Resetting security

Note Applies to AX4-5  series storage systems only.

1

Press the white button to the far right of the power  button/LED on either SP. The amber SP fault LED lights to acknowledge  the press. 

This puts the storage system into a special  state that provides 15 minutes for you reset the storage system's  security credentials.

The 15 minute window stays active until one of the following  is true

  • you log in to the  storage system with a valid username and password
  • you create a new  user account
  • you modify an existing  user account
  • the 15 minutes is  up

2

Wait approximately 2 minutes to Log into the storage  system through either SP.  You  do not need a username/password during this 15 minute time span or you  can log in normally.

3

Once logged in, create or modify  user  accounts.

4

Log in to the storage system using the new username/password  credentials.

另外建立PPP链接的方法可以参考:如何与CLARiiON建立点对点PPP拨号连接?

0 项奖励
12 条回复12
hdssell
2 Iron

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

111.jpg

0 项奖励
Roger_Wu
4 Ruthenium

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

PPP拨号直接进去看吧,AX150很老了,不过应该还是有COM口这样的带外管理吧。

0 项奖励
Highlighted
lbseraph
1 Nickel

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

Note  You may also change the management port IP addresses through the Navisphere Initialization Utility. Once you reboot the storage system, you will not be able to change them unless you repeat the procedure above to uninitialize the storage system.

没有默认管理IP的,用192.168.1.10网段,连接好两个SP的管理口。重新做一遍上面的过程看看?

hdssell
2 Iron

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

我的控制器编号是100-560-944 的单sp的。

0 项奖励
hdssell
2 Iron

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

我的控制器编号是100-560-944 的单sp的,上面没有com口,只有rj45的网口的管理口。

0 项奖励
lbseraph
1 Nickel

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

单SP的也一样啊,一样的步骤。

0 项奖励
hdssell
2 Iron

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

我知道步骤,现在是重置后,用那个ip地址连接呢?

0 项奖励
lbseraph
1 Nickel

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

重置后,当然是用新的management IP来连接登陆了。你看能否ping通新的IP(本子记得设置好和新IP同一个网段的)先。

0 项奖励
hdssell
2 Iron

Re: emc ax150I 存储的默认manage ip 地址是多少呢?忘记管理ip和密码如何重置

转到解答

新的manage ip是多少啊? 怎么设置啊?有具体步骤没有?

0 项奖励