偶怎么看到HBA的Extrnal WWN呢？

本来想知道存储映射给每一个主机的大小的，看到手册上 SYMDISK 有这样的语法:symdisk show -sid xxx -wwn yyyyyyyyyyyyyyyy

可是仔细看了一下原来这个WWN是HBA的extrnal WWN.

但是偶运行的主机的HBA卡要么是这样的：

HBA Type            : FibreChannel
HBA Name            : com.hp.fcd-1
Vendor              : Hewlett-Packard
Model               : AB378-60101    
Serial Number       : JP50040248
Firmware Version    : 4.0.91
Driver Version      : @(#) libfcd.a   HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08.02 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Sep 24 2007,00:39:23
Node WWN            : 5001438007d17d2d
Number of Ports     : 1

    Port WWN            : 5001438007d17d2c
    Port name           : /dev/fcd0
    Port type           : NPort
    Port FCID           : 67584
    Port speed          : 4gbit
    Supported speed     : 4gbit
    Port state          : Online
    Supported COS       : 00000008
    Supported FC4 types : 0001000000000000000000000000000000000000000000000000000000000000
    Active FC4 types    : 0801000000000000000000000000000000000000000000000000000000000000
    Max frame size      : 2048

要么是

fcmsutil /dev/fcd2

                           Vendor ID is = 0x001077
                           Device ID is = 0x002422
            PCI Sub-system Vendor ID is = 0x00103c
                   PCI Sub-system ID is = 0x0012d7
                               PCI Mode = PCI-X 133 MHz
                       ISP Code version = 4.0.91
                       ISP Chip version = 3
                      Previous Topology = UNINITIALIZED
                             Link Speed = UNKNOWN
                     Local N_Port_id is = None
                  Previous N_Port_id is = None
            N_Port Node World Wide Name = 0x5001438004bd5f63
            N_Port Port World Wide Name = 0x5001438004bd5f62
            Switch Port World Wide Name = 0x0000000000000000
            Switch Node World Wide Name = 0x0000000000000000
                           Driver state = AWAITING_LINK_UP
                       Hardware Path is = 1/0/8/1/1
                     Maximum Frame Size = 2048
         Driver-Firmware Dump Available = NO
         Driver-Firmware Dump Timestamp = N/A
                         Driver Version = @(#) libfcd.a HP Fibre Channel ISP 23xx & 24xx Driver B.11.23.08.02 /ux/core/isu/FCD/kern/src/common/wsio/fcd_init.c:Sep 24 2007,00:39:23

就是看不到所谓的extrnal WWN。

改怎么找？