开始新对话

此帖子已超过 5 年

Solved!

Go to Solution

2821

2015年2月23日 00:00

能否有networker 8.0.1连接tape library的手册呢?

大家新年好,

能否有networker 8.0.1连接tape library的手册呢?

1.8K 消息

2015年2月27日 06:00

估计你的情况是系统盘坏了,然后无法登陆?没有容量也会导致设备停止服务,所以设备连接报错。

2 Intern

 • 

4K 消息

2015年2月24日 18:00

设备配置好以后(确保inquire可以看到设备),打开NMC > Devices里应该就能直接看到了吧。

Best practices for configuring tape devices on NetWorker

"The NetWorker software provides the ability to scan, detect, and configure library and tape devices directly from the NetWorker Management Console (NMC) GUI. This is the recommended way to configure libraries, and manual configuration through the jbconfig or jbedit command line tools should be used only in special cases."

2 Intern

 • 

3.2K 消息

2015年2月24日 21:00

t2.jpg

2 Intern

 • 

3.2K 消息

2015年2月24日 21:00

前辈,我这个带库是个VTL

t1.jpg

但是 verify 竟然没有通过

2 Intern

 • 

4K 消息

2015年2月24日 22:00

Networker用得不多,帮你找找看文档,看看这两个文档能不能帮上忙。其实support.emc.com上文档还是很多的,就是没有对搜索引擎公开,外网比较难找到,要去EMC站点上仔细挖掘。

NetWorker 8.0 with Data Domain CIFS, NFS, and VTL Integration Guide

https://support.emc.com/docu48782_NetWorker-8.0-with--Data-Domain-CIFS,-NFS,-and-VTL-Integration-Guide.pdf?language=en_U…

Configuring Tape Devices for EMC NetWorker

https://support.emc.com/docu8123_Configuring-Tape-Devices-for-EMC-NetWorker.pdf?language=en_US

2 Intern

 • 

3.2K 消息

2015年2月24日 22:00

这个时候通过networker的备份软件 GUI界面可以看到两个driver 但不能对已经发现的tape 进行inventory ,label 等操作

read open error: command completed successfully (drive status is LOGICAL UNIT NOT READY, MANUAL INTERVENTION REQUIRED)

t3.jpg

56 消息

2015年2月25日 18:00

从inquire输出看,我们可以看到一个机械臂,但\\.\physicaldrive1 应该不是一个驱动器,按照我的经验看更多的是一个从存储划过来的LUN,不论是VTL还是PTL, 正常的驱动器名字在windows中应该是\\.\Tapexxxxx

所以这就是为什么jbverify不能通过并产生read open error的原因。

您可以到操作系统中的设备管理中查看下tape drive的状态,我猜测可能会没有。然后查看下驱动程序是否有问题

谢谢

1.8K 消息

2015年2月26日 00:00

带库状态是否打绿色的勾?如果没有,多数都是连通性问题、驱动问题,或者带库设备问题。

2 Intern

 • 

3.2K 消息

2015年2月26日 00:00

谢谢,哦客户这边的供应商比咱甲方还牛修不好就不管了。

偶这个做DBA的明天找时间捣鼓 捣鼓

2 Intern

 • 

3.2K 消息

2015年2月26日 00:00

前辈,听说您之前玩过赛普通

administrator@SEPATON1>getLicense

   License  ChassisId  Key         Fcdisks  LicensedApps  HostPorts  LicenseDevList                                                                                                                                                                

1) License  10003      1008160106  4        {}            [2]        [LicenseDev_0, LicenseDev_1, LicenseDev_2, LicenseDev_3, LicenseDev_4, LicenseDev_5, LicenseDev_6, LicenseDev_7, LicenseDev_8, LicenseDev_9, LicenseDev_10, LicenseDev_11, LicenseDev_12, LicenseDev_13, LicenseDev_14, LicenseDev_15, LicenseDev_16, LicenseDev_17, LicenseDev_18, LicenseDev_19, LicenseDev_20, LicenseDev_21, LicenseDev_22, LicenseDev_23, LicenseDev_24, LicenseDev_25, LicenseDev_26, LicenseDev_27, LicenseDev_28]

这个是不是说 VTL中虚拟出来的tape最多只能有29个呀?

2 Intern

 • 

3.2K 消息

2015年2月26日 20:00

哎,重新启动之后出现了。

System ( /usr/java/jre/bin/java -Ds2xmgr.home=/S2100/s2xmgr_java -cp /S2100/s2xmgr_java/s2xcli.jar com.sepaton.s2xmgr.cli.acorn -clishell -jx /S2100/s2xmgr_java/bin/jexec -u administrator -o /S2100/s2xmgr_java/cli_administrator.log -c continueOnError -c connect )

com.sepaton.rpc.ProxyException: java.io.IOException: Connection refused

        at com.sepaton.rpc.XmlRpcProxy.invoke(XmlRpcProxy.java:79)

        at $Proxy0.getServiceTypes(Unknown Source)

        at com.sepaton.rpc.StubRpcKernel.syncServiceList(StubRpcKernel.java:31)

        at com.sepaton.rpc.StubRpcKernel.getAll(StubRpcKernel.java:57)

        at com.sepaton.rpc.StubRpcKernel.get(StubRpcKernel.java:49)

        at com.sepaton.s2xmgr.cli.commands.GetChassis.initialize(GetChassis.java:27)

        at com.sepaton.s2xmgr.cli.commands.GetChassis. (GetChassis.java:22)

        at com.sepaton.s2xmgr.cli.CommandManager.initCommands(CommandManager.java:35)

        at com.sepaton.s2xmgr.cli.CommandManager. (CommandManager.java:30)

        at com.sepaton.s2xmgr.cli.acorn.initCommands(acorn.java:204)

        at com.sepaton.s2xmgr.cli.acorn.doInternal(acorn.java:1395)

        at com.sepaton.s2xmgr.cli.acorn.processCommand(acorn.java:1085)

        at com.sepaton.s2xmgr.cli.acorn.go(acorn.java:873)

        at com.sepaton.s2xmgr.cli.acorn.main(acorn.java:161)

Caused by: java.io.IOException: Connection refused

        at org.apache.xmlrpc.XmlRpcClient$Worker.execute(XmlRpcClient.java:444)

        at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:163)

        at com.sepaton.rpc.XmlRpcProxy.invoke(XmlRpcProxy.java:75)

        ... 13 more

connect

connect

Could not get server features.  java.io.IOException: Connection refused

1.8K 消息

2015年2月26日 23:00


你这个是登陆思博通的报错吧?换个浏览器试下?

2 Intern

 • 

3.2K 消息

2015年2月27日 04:00

供应商换了个硬盘  重新做RAID就又能登陆了

但是 storage pool却没有任何capacity了

找不到事件!

Top