Hey have you been having trouble with your H80i.
I periodically get shut down and I think it has to do with where mines plug-in that I have it plugged into the USB3
that was the only one that was available on my motherboard.
Have you experienced anything like this with yours?
Hey , personnally i've had no problem at all with my h80i (installed it about 10 days ago).
I plugged mine on USB1 as it was the only one free, but imo it doesn't make a difference.
When you present it like that it feels like shutdowns due to high core temp (supposing the problem is coming from the cooling system). So maybe your cooling unit is not working at all? You'll know that better than me?
To check temps you should use something like SpeedFan which is much more reliable than alienware's software at least for me.
Hope that helped.
Well I use CPUID HWMonitor
And it doesn't show its overheating so did you tell me in CMOS you turn all the cooling system off is that correct the pump in particular
Oh yes sorry to keep bugging you what to do with the rest of the fans did you attach them to your cooling device?
I'm thinking maybe that's my problem the hard drive fan, and the system fan, and the graphics fan, are still being controlled by the motherboard are you doing the same thing?
Hello, ive had the same problem with that stuff, But i found a other problem....
Have you tried to take the pump off the 2 hoses and blow in the hose ? I did, the hose and radiator was BLOCKED tight.
So i took the fan off the radiator and the pump off the hoses, boiled the radiator in hot water with alcohol in the hoses, i then flushed it with water pressure, and voilà everything got unblocked !
Now my CPU temp is between 49 and 51 degrees C.
Note: i have added a liquid made for CPU cooled pumps.
Hi, i m still with the command center but it's not very reliable and I've just been too lazy to search for another software.
I just put the fans on the SYS slot to be able to turn them down with the software since they used to go way too fast and make a lot of noise.
Anyway i guess if you're reluctant to remove the alien command center it's due to the other functionalities that you would be uninstalling. I have no clue on how to disable only the thermal controls but that would be what i'd try to do.
Same thing happend to my R4, Did that corsair bolt right up with no modification just plug and play? I have to fix mine and i'm kinda a noob.