This post is more than 5 years old
100 Posts
0
1874
Using more than 16 GB of HyperX DDR4 2400 MHz, XMP memory in an Aurora R5
With the early release of the Aurora R5, the system officially only supported 16 GB of 2400 MHz memory using XMP.
Has that changed so that more than 16 GB is now supported?
My plans, to install 32 GB of HyperX DDR4, 2400 MHz, XMP.
As for the memory voltage, is 1.2V only supported or can 1.35V be used as well?
Thanks
Alienware-Eimy
3 Apprentice
3 Apprentice
•
4.4K Posts
0
February 14th, 2017 15:00
Hi,
Yes the system will support 32GB of 2400 MHZ, but just if the system has the latest BIOS version and the i7-6700K processor.
About the memory voltage, we do not support the 1.35V.
gohack
100 Posts
0
February 14th, 2017 17:00
What HyperX DDR4 2400 MHz memory P/N should I purchase?
Should I purchase 4x 8 GB or 2 x 16 GB memory?
Thanks
Alienware-Eimy
3 Apprentice
3 Apprentice
•
4.4K Posts
0
February 16th, 2017 10:00
Well, HyperX no es officially supported since we don't sell it, therefore we do not have a specific part number to recommend.
Regarding the other part, we always recommend to fill all available slots .