No resuelto
1 Mensaje
0
795
SC8000 reset & clear
We need to use a SC8000 + SC200 used previously. But, we have no password. We only need to reset and erase all configurations, but Dell's public documentation does not provide the procedures to do this and is a big problem for anyone who buys this kind of machine. It's a circle, because if we don't have the password, we can't know the IP address. I do not understand why Dell does not provide this basic information.
Lixc3
1 Mensaje
0
14 de febrero de 2020 11:00
Recovering a Locked Administrator Account
If all accounts are inaccessible because have been disabled or locked‐out, use this procedure to re‐ establish a local Administrator account and reset passwords.
Prerequisites This procedure requires a USB device that contains a partition table with one partition formatted with an MSDOS/FAT32 filesystem.
USB devices vary by vendor as to whether they are formatted with or without partitions. Use Windows disk management or other third‐party tools to create a partition if the USB device does not have an MSDOS/FAT32 partition. Steps
DiegoLopez
4 Operator
4 Operator
•
2.7K Mensajes
0
17 de febrero de 2020 04:00
Hello @Lixc3,
Thank you for sharing this information in the Community!
Best regards.