Unsolved
This post is more than 5 years old
337 Posts
0
5607
MIB for Atmos
Hi all
Has anyone been able to find the MIB that is supposed to exist for ATMOS? It is referenced in the Admin Guide but I cannot find it. Would be kind of nice to have a download link in the admin GUI.
Thanks, Holger
JasonCwik
281 Posts
0
September 26th, 2011 06:00
Hi Holger,
What version of Atmos are you looking for? I see the trap list on page 134 of "EMC Atmos Version 1.4.1 Administrator's Guide"
holgerjakob_c0722c
337 Posts
0
September 26th, 2011 08:00
Hi Jason
We have Version 2.0 set up recently. So the MIB for Version 2.0 is of interest.
Would be great if it could be posted under the download section in ATMOS.
Thanks, Holger
JasonCwik
281 Posts
0
September 26th, 2011 12:00
Hi Holger,
Documentation for all versions of Atmos should be available on Powerlink:
http://powerlink.emc.com/km/appmanager/km/secureDesktop?_nfpb=true&_pageLabel=servicesDocLibPg&internalId=0b01406680341c35&_irrt=true
holgerjakob_c0722c
337 Posts
0
September 27th, 2011 05:00
Hi Jason
Even though I connect to Powerlink with my partner login I get an access violation on your link. Everything under software downloads is only available if an Atmos license is registered in my site.
Please put the MIB into the download section of Atmos in EDN or into the zip file of AEE 2.0. If I'm the only one looking for it you could also attach it to holger.jakob@informatio.ch.
Best regards, Holger
JasonCwik
281 Posts
0
September 27th, 2011 06:00
Hi Holger,
I forwarded on your request to include the documentation in the AEE distribution and sent you a download link to the administrator's guide via email.
holgerjakob_c0722c
337 Posts
0
September 27th, 2011 06:00
Hi Jason
I'm not looking for the admin guide. This one is downladable in Powerlink. But not the MIB itself.
I wonder what in a textfile is so secret that it cannot be put in the documentation instead of the software section where only registered customers of Atmos see it. Also for the AEE distribution I did not mean to include the docs but the mib. As the documentation is downloadable this part can be found and is indeed good.
Holger
JasonCwik
281 Posts
0
September 27th, 2011 07:00
Hi Holger,
Sorry, I misunderstood your request. I haven't used SNMP myself before and didn't realize there was a MIB file you needed. I'll track it down.
StevenRuo
19 Posts
0
September 27th, 2011 10:00
Hi Holger,
I emailed the MIB to you. I will also work with the appropriate people to see about moving the MIB to the documenation section of Powerlink for Atmos.
Regards,
Steven Ruo
Global Services
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
November 1st, 2011 08:00
The ATMOS MIB could be found in powerlink.emc.com
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Software_Download/EMC-ATMOS-MIB-v1_1.txt?mtcs=ZXZlbnRUeXBlPUttQ2xpY2tTZWFyY2hSZXN1bHRzRXZlbnQsZG9jdW1lbnRJZD0wOTAxNDA2NjgwNWI1ODc1LGRhdGFTb3VyY2U9RENUTV9lbl9VU18w
Also refer to the ATMOS admin guide for more details.
http://powerlink.emc.com/km/appmanager/km/secureDesktop?_nfpb=true&_pageLabel=servicesDocLibPg&internalId=0b01406680341c35&_irrt=true
You have specific section for ATMOS MIB in the above admin guide.
shegarty1
24 Posts
0
May 10th, 2013 08:00
You can find the MIB for 2.1.x code at the following link:
https://support.emc.com/downloads/7869_Atmos