This post is more than 5 years old
274.2K Posts
0
747
reinstall avamar gen 1 node using avqinstall encountered EventID: 2095
Hi All
I've reinstalled following software :
1) avamar-kickstart-rhel4.8-64-0032.iso
2) v5.0.4.30-customer_unified-v5.0.106.28.tar.gz
avqinstall did not complete and encountered following error :
Checking for prime completion. Please wait.
2013/06/27-03:11:05.12974 {0.0} [log-messages:108] ERROR: <0001> HARDWARE: Jun 27 01:51:27 localhost Server Administrator: Storage Service EventID: 2095 SCSI sense data Sense key: 5 Sense code: 24 Sense qualifier: 0: Enclosure 0:0 Controller 0, Connector 0
ERROR: checkprimecomplete encountered a gsan error, stopped at /usr/local/avamar/bin/start.dpn line 374.
2013/06/27-03:11:05 - - - - - - - - - - - - END
2013/06/27-03:11:05 avqinstall: ERROR: the following lines from the output of the preceding command indicated problems:
2013/06/27-03:11:05.12974 {0.0} [log-messages:108] ERROR: <0001> HARDWARE: Jun 27 01:51:27 localhost Server Administrator: Storage Service EventID: 2095 SCSI sense data Sense key: 5 Sense code: 24 Sense qualifier: 0: Enclosure 0:0 Controller 0, Connector 0 ERROR: checkprimecomplete encountered a gsan error, stopped at /usr/local/avamar/bin/start.dpn line 374.
I've confirmed that there is no hardware problem with these nodes. How can i overcome this issue?
Thanks
ionthegeek
2K Posts
0
June 27th, 2013 05:00
As a first step, you will need to re-kickstart this node with the RHEL 4u6 kickstart image. The 4u8 kickstart is only qualified against Gen3 hardware.
This is a known issue in avqinstall. Are you following the procedure generator? The logrotate command in step 53 of the documented install procedure will prevent this issue from occurring.