Cabling Dell M1000e with EqualLogic PS4100X

[aliko23]

Hello,

my name is Achilleas and I come from Greece, so I apologize for my English writing in advance.

We recently bought a Dell M1000e with 6 half-size PowerEdge M610 servers, 4 PowercConnect M6220 I/O modules and a EqualLogic PS4100X storage.

My question is, which is the best solution for cabling the Blades with the storage.

I have read some official articles from Dell but I must say I am a little confused.

Thanks in advance,

Achilleas

[DELL-Joe S]

I’m not sure if you looked at this yet:

A typical M1000 w/ the M6220’s setup is outlined in the Configuration Guide: en.community.dell.com/.../2639.equallogic-configuration-guide.aspx

Look at section 4.7 Blade Server Chassis Integration

-joe

[aliko23]

Thanks Joe for the quick answer.

After reading the configuration guide you suggested,

I come up with the solution in the attached image.

Is this a right cabling solution?

Achilleas