Unsolved
This post is more than 5 years old
9 Posts
0
9037
Cabling Dell M1000e with EqualLogic PS4100X
Hello,
my name is Achilleas and I come from Greece, so I apologize for my English writing in advance.
We recently bought a Dell M1000e with 6 half-size PowerEdge M610 servers, 4 PowercConnect M6220 I/O modules and a EqualLogic PS4100X storage.
My question is, which is the best solution for cabling the Blades with the storage.
I have read some official articles from Dell but I must say I am a little confused.
Thanks in advance,
Achilleas
DELL-Joe S
7 Technologist
7 Technologist
•
729 Posts
0
July 20th, 2012 09:00
I’m not sure if you looked at this yet:
A typical M1000 w/ the M6220’s setup is outlined in the Configuration Guide: en.community.dell.com/.../2639.equallogic-configuration-guide.aspx
Look at section 4.7 Blade Server Chassis Integration
-joe
aliko23
9 Posts
0
July 21st, 2012 10:00
Thanks Joe for the quick answer.
After reading the configuration guide you suggested,
I come up with the solution in the attached image.
Is this a right cabling solution?
Achilleas