2 Bronze

Cabling Dell M1000e with EqualLogic PS4100X

Hello,

my name is Achilleas and I come from Greece, so I apologize for my English writing in advance.

We recently bought a Dell M1000e with 6 half-size PowerEdge M610 servers, 4 PowercConnect M6220 I/O modules and a EqualLogic PS4100X storage.

My question is, which is the best solution for cabling the Blades with the storage.

I have read some official articles from Dell but I must say I am a little confused.

Thanks in advance,

Achilleas

0 Kudos
2 Replies
Moderator
Moderator

Re: Cabling Dell M1000e with EqualLogic PS4100X

I’m not sure if you looked at this yet:

A typical M1000 w/ the M6220’s setup is outlined in the Configuration Guide: en.community.dell.com/.../2639.equallogic-configuration-guide.aspx

Look at section 4.7 Blade Server Chassis Integration

-joe

-Joe

Social Media and Community Professional
#IWork4Dell
Get Support on Twitter - @dellcarespro

Follow me on Twitter: @joesatdell 

0 Kudos
2 Bronze

Re: Cabling Dell M1000e with EqualLogic PS4100X

Thanks Joe for the quick answer.

After reading the configuration guide you suggested,

I come up with the solution in the attached image.

Is this a right cabling solution?

Achilleas  

0 Kudos