1. Right click on SP A > Properties > Network > Tick 'Enable/Disable processing of SNMP MIB read requests'. The same to SP B.
2. From Enterprise Storage window, go to Monitors tab > right-click a template to be used > SNMP tab > specify SNMP management host and Community name. (Commonly 'public'. But it depends on your SNMP environment).
chiodp
149 Posts
1
January 27th, 2010 06:00
For enable it you need to log in navisphere then go to the sp property, network and flag "Enable/disable processing of SNMP MIB read requests"
Also for you client you can download the MIB for compile it and this can be found in the website below
http://www.emc.com/microsites/fibrealliance/
After you did this you can query the clariion , below is an example with smptwalk
See the output below...
C:\usr\bin>snmpwalk -m all -v 2c -c public 10.14.18.104 .1.3.6.1.3.94
FCMGMT-MIB::uNumber.0 = INTEGER: 1
FCMGMT-MIB::systemURL.0 = STRING: "http://10.14.18.104"
FCMGMT-MIB::statusChangeTime.0 = Timeticks: (133261812) 15 days, 10:10:18.12
FCMGMT-MIB::connUnitTableChangeTime.0 = Timeticks: (115616221) 13 days, 9:09:22.
21
FCMGMT-MIB::connUnitId.'FNM00085200072..' = Hex-STRING: 46 4E 4D 30 30 30 38 35
32 30 30 30 37 32 00 00
FCMGMT-MIB::connUnitGlobalId.'FNM00085200072..' = Hex-STRING: 46 4E 4D 30 30 30
38 35 32 30 30 30 37 32 00 00
FCMGMT-MIB::connUnitType.'FNM00085200072..' = INTEGER: storage-subsystem(11)
FCMGMT-MIB::connUnitStatus.'FNM00085200072..' = INTEGER: ok(3)
FCMGMT-MIB::connUnitProduct.'FNM00085200072..' = STRING: "CX4-480"
FCMGMT-MIB::connUnitSn.'FNM00085200072..' = STRING: "FNM00085200072"
FCMGMT-MIB::connUnitUrl.'FNM00085200072..' = STRING: "http://10.14.18.104"
FCMGMT-MIB::connUnitName.'FNM00085200072..' = STRING: "FNM00085200072"
FCMGMT-MIB::connUnitName.'FNM00085200072..' = No more variables left in this MIB
View (It is past the end of the MIB tree)
harshab
20 Posts
1
January 27th, 2010 08:00
setting up snmp on the clariion..........
1. Right click on SP A > Properties > Network > Tick 'Enable/Disable processing of SNMP MIB read requests'. The same to SP B.
2. From Enterprise Storage window, go to Monitors tab > right-click a template to be used > SNMP tab > specify SNMP management host and Community name. (Commonly 'public'. But it depends on your SNMP environment).
wescott1
36 Posts
1
January 27th, 2010 11:00
There are actually two mibs that might be of interest. One
is the fibre alliance mib mentioned already. The other is the
clariion.mib which can be found on powerlink. The clariion.mib
file has no get-able or set-able OIDs and only describes the
traps sent by Eventmonitor.
--
Mike Wescott
Wescott_Mike@EMC.COM
Alec2
19 Posts
0
January 28th, 2010 04:00
Thank you all
Alec