Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

DraganK

36 Posts

1091

January 19th, 2017 23:00

CX300 SixtyDriveOption

Hello,

I have CX300 with 30 drives (two enclosures) installed. I want to add another disk enclosure (third one) with 15 disks and have an issue DAE cannot be added to the system due to reaching maximum number of supported drives

I find that SixtyDriveOption enabler must be installed.

Enabler for SixtyDriveOption is not installed by default. Is there any option to download it, and was it free of charge?

Thanks

Jyothi_P_Bharat

317 Posts

January 24th, 2017 02:00

Hi,

Please have a look on the below mentioned link.It might help you:

Re: CX300 60-Drive enabler

Thanks

Jyothi

DraganK

36 Posts

January 24th, 2017 03:00

Hi,

please, find bellow listed all packages and there is no -SixtyDrive option that is needed

I can update do Flare update from 02.19 to 02.24 or even 02.26 but don't know is -SixtyDrive included in new Flare version

Name of the software package:   -NavisphereAnalyzer
Revision of the software package: -
Commit Required:                NO
Revert Possible:                NO
Active State:                   YES
Required packages:              AnalyzerUI >=140, AnalyzerProvider >=140
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   SANCopy
Revision of the software package: 02.19.002.5.014
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Required packages:              BundleIndex >=140
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   FLARE-Operating-Environment
Revision of the software package: 02.19.300.5.014
Commit Required:                NO
Revert Possible:                NO
Active State:                   YES
Required packages:              FA_MIB 160, AnalyzerProvider 190, OpenSANCopy 190, SnapView 190, EMCRemoteNG 190, EMCRemote 140, SnapCloneProvider 190, CLIProvider 190, AnalyzerUI 190, MirrorViewUI 190, SANCopyUI 190, SnapViewUI 190, ManagementUI 190, ManagementServer 190, Navisphere 190, Base 190
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   SnapView
Revision of the software package: 02.19.002.5.007
Commit Required:                NO
Revert Possible:                NO
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014
Required packages:              BundleIndex >=140
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   AnalyzerProvider
Revision of the software package: 6.19.0.4.14
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             -NavisphereAnalyzer -, FLARE-Operating-Environment 02.19.300.5.014
Required packages:              ManagementServer 190, ManagementServerBase MUST NOT BE INSTALLED
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   EMCRemote
Revision of the software package: 01.02.5.001
Commit Required:                NO
Revert Possible:                NO
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   FA_MIB
Revision of the software package: 2.4.0.0.6
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   SANCopyUI
Revision of the software package: 6.19.0.4.15
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014
Required packages:              ManagementUI 190, ManagementUIBase MUST NOT BE INSTALLED
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   ManagementUI
Revision of the software package: 6.19.0.4.15
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014, SANCopyUI 6.19.0.4.15, AnalyzerUI 6.19.0.4.15, MirrorViewUI 6.19.0.4.15, SnapViewUI 6.19.0.4.15, -NavisphereManager -
Required packages:              ManagementServer <=190, ManagementServer >=160
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   -AccessLogix
Revision of the software package: -
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Required packages:              Base >=131, ACCESSLOGIXOPTION_PERMIT >=1, ACCESSLOGIXOPTION_PERMIT >=10 MUST NOT BE PRESENT
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   Navisphere
Revision of the software package: 6.19.1.2.6
Commit Required:                NO
Revert Possible:                NO
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014, ManagementServer 6.19.0.4.14
Required packages:              Base >=180
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   Base
Revision of the software package: 02.19.300.5.010
Commit Required:                NO
Revert Possible:                NO
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014, -AccessLogix -, Navisphere 6.19.1.2.6, EMCRemoteNG 01.05.5.001
Required packages:              BundleIndex >=140
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   SnapCloneProvider
Revision of the software package: 6.19.0.4.14
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014
Required packages:              ManagementServer 190
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   CLIProvider
Revision of the software package: 6.19.0.4.14
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014
Required packages:              ManagementServer 190
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   ManagementServer
Revision of the software package: 6.19.0.4.14
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014, AnalyzerProvider 6.19.0.4.14, ManagementUI 6.19.0.4.15, SnapCloneProvider 6.19.0.4.14, CLIProvider 6.19.0.4.14, -NavisphereManager -
Required packages:              Navisphere 190
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   AnalyzerUI
Revision of the software package: 6.19.0.4.15
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             -NavisphereAnalyzer -, FLARE-Operating-Environment 02.19.300.5.014
Required packages:              ManagementUI 190, ManagementUIBase MUST NOT BE INSTALLED
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   MirrorViewUI
Revision of the software package: 6.19.0.4.15
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014
Required packages:              ManagementUI 190
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   SnapViewUI
Revision of the software package: 6.19.0.4.15
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014
Required packages:              ManagementUI 190
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   EMCRemoteNG
Revision of the software package: 01.05.5.001
Commit Required:                NO
Revert Possible:                YES
Active State:                   YES
Dependent packages:             FLARE-Operating-Environment 02.19.300.5.014
Required packages:              Base >=190
Is installation completed:      YES
Is this System Software:        NO

Name of the software package:   -NavisphereManager
Revision of the software package: -
Commit Required:                NO
Revert Possible:                NO
Active State:                   YES
Required packages:              ManagementUI >=140, ManagementServer >=140, NaviManager_PERMIT >= 1, NaviManager_PERMIT >= 10 MUST NOT BE PRESENT
Is installation completed:      YES
Is this System Software:        NO

kelleg

4.5K Posts

March 29th, 2017 13:00

I believe you need to install the 60-drive enabler first, then update the flare. You'll need to contact your EMC account rep for you're area.

glen

View More

View All

No Events found!

Top