KDH_-_
6 Indium

Re: CX300 won't boot

Hi

Have you tried to reseat the SP's, PSU, and flare drives ?

0 Kudos
miromix
1 Nickel

Re: CX300 won't boot

Sure. This was the first thing I tried

0 Kudos
8 Krypton

Re: Re: CX300 won't boot

Just to be sure, the Fault light - the top light - is the one that should blink when the SP is powering on. See if you can detect the blink rate as noted in my earlier post.

glen

CX300 Back View.JPG.jpg

0 Kudos
miromix
1 Nickel

Re: Re: CX300 won't boot

Glen, the Power Light is green and the Fault Light blinks every 4 seconds. The lights on HDD are both on - green and amber - and they just stay on. Trying to connect via terminal (9600, 8bits, no parity, stop bits - 1, no flow control) - nothing happens.

The system powered on for hours and the situation remains...

Any thoughts?

0 Kudos
8 Krypton

Re: CX300 won't boot

Sorry for the late reply - it the fault light blinks once every four seconds, that means the first part of the BIOS load is failing. This usually means that the BIOS is not working. This would require a service request to EMC to troubleshoot further.

Does this occur with both SP's is you try to start up with only one SP installed?

glen

0 Kudos