Highlighted
2 Bronze

CX4 NQM

Hi

I have setup a policy to limit certain number of  LUNs I have on a CX4-480.

LUN 55, 300 and 301 with each limit to 500 IOPS

NQM1.jpg

For some reasons, Lun 55's IOPS has not been kept within the limit. IO spikes (far exceeding limit of 500) almost every 3-4min.

below is the policy setting I have

NQM2.jpg

Can anyone please explain to me why this behaviour happens?

another thing I have picked up in SP A alert:-

"NQM was unable to continue to satisfy the goal in current running policy"

Labels (1)
0 Kudos
3 Replies
Highlighted
3 Argentum

Re: CX4 NQM

Hi,

What is the complete FLARE version on the Array ?

Thanks

Madhu

0 Kudos
Highlighted
2 Bronze

Re: CX4 NQM

Its running on 4.30.000.5.524 (latest)

0 Kudos
Highlighted
5 Rhenium

Re: CX4 NQM

It's possible that other activity on the arary is limiting NQM's ability to satisfy the goals - for example, if you're overdriving the disks in the raid group that LUN 55 resides. You need to take a look at your array's overall performance without NQM running and see if you have any performance issues - overloaded disks, force flushing, etc.

See emc218359 for a list of Support Solutions about using Analyzer and some Best Practice recommendations.

glen

0 Kudos