Highlighted
uk2
2 Iron

HBA is not getting discovered in the ECC.

One of our LINUX host's HBA is not getting discovered by the ECC v6.0.

We have installed the Master agent and host agent in the LINUX host, here are the host & HBA informations.

Kindly help me to solve this issue.

==================================================================================================================

Distribution    :    Red Hat
Release     :    Enterprise Linux Server release 5.3 (Tikanga)
Red Hat release :    4.1.2-44
kernel version     :    2.6.18-128.el5 (SMP) - built by gcc 4.1.2
os_display_name :    RHEL [x86_64] 5.3

---------------QLogic HBA Checks---------------------------------------
QLogic HBA Checks
/sys/class/scsi_host/host0
Model Desc    
HBA Model     QMH2462 (QLogic QMH2462 4Gb FC HBA for HP c-Class Bladesystem (403619-B21))
FW Version     4.04.05 [IP] [Multi-ID] [84XX]
Driver Version     8.02.00.06.05.03-k
EMC Supported Driver version(s)     8.02.00.06.05.03-k (Matched Driver version: 8.02.00.06.05.03-k)
Serial Number     N/A
WWPN     50014380056a28e8
WWNN     50014380056a28e9
Fabric Name     2064000dec729001
State     Link Up - F_Port
Port Type     NPort (fabric via point-to-point)
cmds-per-lun     XNU     XNU     XNU     speed     XNU     XNU     XNU     tgtid-bind-type     XNU
3     N/A     N/A     N/A     4 Gbit     N/A     N/A     N/A     wwpn     N/A

/sys/class/scsi_host/host1
Model Desc    
HBA Model     QMH2462 (QLogic QMH2462 4Gb FC HBA for HP c-Class Bladesystem (403619-B21))
FW Version     4.04.05 [IP] [Multi-ID] [84XX]
Driver Version     8.02.00.06.05.03-k
EMC Supported Driver version(s)     8.02.00.06.05.03-k (Matched Driver version: 8.02.00.06.05.03-k)
Serial Number     N/A
WWPN     50014380056a28ea
WWNN     50014380056a28eb
Fabric Name     2064000dec728f01
State     Link Up - F_Port
Port Type     NPort (fabric via point-to-point)
cmds-per-lun     XNU     XNU     XNU     speed     XNU     XNU     XNU     tgtid-bind-type     XNU
3     N/A     N/A     N/A     4 Gbit     N/A     N/A     N/A     wwpn     N/A
----------------------------------------------------------------------------------------

==================================================================================================================

Labels (1)
0 Kudos
2 Replies
dynamox
6 Thallium

Re: HBA is not getting discovered in the ECC.

Umesh,

you will get a lot more replies in Ionix > ControlCenter section of the forum, try to post your question there.

0 Kudos
uk2
2 Iron

Re: HBA is not getting discovered in the ECC.

I have found a solution my self.

RESOLUTION

Download the SANSURFER utility from the 'QLOGIC' (HBA card vendor) website and install it on the LINUX client.

Restart the following service.

- ECC Master agent.

- Navishphere host agent.

- SANSurfer.

Job done.

0 Kudos