Skip to main content
Start a Conversation

Unsolved

This post is more than 5 years old

Vamsikiran

4 Posts

754

September 16th, 2010 16:00

How can we change the management IP and domain of a CX-300

Hi,

We have a CX 300, and CX4-240 both them are moved from one location to another location. We are trying to change the IP addresses for both and  also tryig ot move them to another domain. Can some one point me to a document which guides me to do all this.

Jim_A1

59 Posts

September 16th, 2010 18:00

Vamsi,

you need to do the following -

File > Setup Domain > Configure Domain

Then remove the all the arrays from  the domain.

When the arrays are out and the domian is destroyed...you can change the IP addrs of the arrays.

When the ip addrs are set, then recreate the domain, and add the arrays back.

Roops1

18 Posts

September 16th, 2010 19:00

Hi

Below mentioned is the procedure to change the IP address. But keep one thing in mind that below steps will cause SP reboot.

Change the IP address on SP A:

  1. Open a web browser and go to the setup page for SP A:

    http:// /setup/


  2. In the IP address field change the current IP address to the new IP address.


  3. Click Apply Settings.

    The SP will reboot (may take up to five minutes).


  4. Go back to the setup page for SP A using the new IP address:

    http:// /setup/

Change the IP address of SP B:

  1. Open a web browser and go to the setup page for SP B:

    http:// /setup/


  2. In the IP address field change the current IP address to the new IP address.


  3. In the Peer IP Address field change the IP address to the new SP A IP address.


  4. Click Apply Settings.

    The SP will reboot (may take up to five minutes).


  5. Go back to the setup page for SP B using the new IP address:

    http:// /setup/


  6. Scroll down and click Restart Management Server.


  7. A warning screen will appear.  Select Yes and click Submit to restart the management server.

Update SP A with the new Peer IP address:

  1. Open a web browser and go to the setup page for SP A:

    http:// /setup/


  2. Scroll down and click Restart Management Server.


  3. A warning screen will appear.  Select Yes and click Submit to restart the management server.

Domain Configuration :-

  1. Use Navisphere Manager to connect to one of the arrays that are still in the domain.


  2. From the Navisphere Manager main menu, select File > Set Up Domain > Configure Domain.  The Configure Domain dialog box appears.


  3. In the Available Systems field, highlight the array whose SP IP addresses you want to change, and click the arrow to send it to the Selected Systems field.


  4. Click Apply, and then click OK.


  5. Exit Navisphere Manager.

Please mark it answered if this answer your query.

View More

View All

No Events found!

Top