Highlighted
Not applicable

Need Info on EMC CX4-120 ISCSI boot with Cisci UCS B22 M3

Hi

Below is my topology

1.jpg

Will this setup work?

Will i be able to do iscsi boot with CX4-120?

I dont know how to configure iscsi luns in EMC CX4-120.

Any one give solutions or guide to proceed with cisco UCS B22 M3?

-Nagendran.M

Labels (1)
0 Kudos
2 Replies
Highlighted
5 Rhenium

Re: Need Info on EMC CX4-120 ISCSI boot with Cisci UCS B22 M3

iSCSI boot from the CX4 is supported as long as the type of iSCSI interface on the host has the support for boot-from-san as part of its firmware. You need to speak to you network card vendor or the blade vendor on how to get this to work.

glen

0 Kudos
Highlighted
5 Rhenium

Re: Need Info on EMC CX4-120 ISCSI boot with Cisci UCS B22 M3

Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.

glen

0 Kudos