Unsolved
This post is more than 5 years old
103 Posts
0
572
Performance Metrics Threshold
Hello,
I've been trying to ask my SE on this info, but couldn't get the full information that i'm expecting. So here it is...
in viewing data on the navi analyzer what counters do you normally look at and what thresholds should you be looking out for? Better yet, can anyone point me to a doc that has all the counters with specific thresholds?
thanks again!
I've been trying to ask my SE on this info, but couldn't get the full information that i'm expecting. So here it is...
in viewing data on the navi analyzer what counters do you normally look at and what thresholds should you be looking out for? Better yet, can anyone point me to a doc that has all the counters with specific thresholds?
thanks again!
jps00
392 Posts
0
May 8th, 2009 07:00
In addition, there is a higher-level discussion of Performance and Availably metrics, such as LUN utilization and SP Utilization in the EMC CLARiiON Storage System Fundamentals for Performance and Availability document, likewise available on Powerlink.
http://powerlink.emc.com/km/live1/en_US/Offering_Technical/Technical_Documentation/069001158_A08_elccnt_0.pdf?mtcs=ZXZlbnRUeXBlPUttQ2xpY2tTZWFyY2hSZXN1bHRzRXZlbnQsZG9jdW1lbnRJZD0wOTAxNDA2NjgwMDk2OWFmLGRhdGFTb3VyY2U9RENUTV9lbl9VU18w
kelleg
4.5K Posts
0
May 8th, 2009 08:00
The last Analyzer Admin Guide is for Release 19 - it is still a good reference manual.
Home > Support > Technical Documentation and Advisories > Software ~ J-O ~ Documentation > Navisphere Management Suite > Maintenance/Administration
glen