Unsolved
This post is more than 5 years old
12 Posts
0
479
SAN Copy interoperability question
Has anyone used SAN Copy with a Nexsan SATAbeast array as the target device?
My customer wants to back up a CX4-480 to a SATAbeast array before they physically relocate the CX4.
Neither the Nexsan interoperability guide or EMC eLab Interoperability Navigator shows the combination as being supported, so I'll let the customer know that. But, I'm curious if anyone has done this before. If you have, please let me know if it worked ok.
Thanks
Jyothi_P_Bharat
317 Posts
0
July 30th, 2014 07:00
Hi,
Even I checked in EMC eLab Interoperability Navigator,but did not find any information.So I request you to contact EMC support for further assistance.
Thanks
Jyothi
kelleg
4.5K Posts
0
July 30th, 2014 14:00
Not much that EMC Support can do if it's not listed in the Compatibility guide.
glen