Highlighted
Not applicable

Setup of cx-480

Can someone tell me the default IP address for a cx-480.

Thanks

0 Kudos
3 Replies
Highlighted
7 Thorium

Re: Setup of cx-480

there is no default IP address, it's whatever you set it to during the initial config.

0 Kudos
Highlighted
4 Beryllium

Re: Setup of cx-480

Hi mgmmu


It seems you have forgotten the IP Address to access the CX4.


Anyhoo, You can connect using to CLARiiON using Service LAN ports.  You would only need to connect to one either SPA or SPB.

Configure your service laptop to use the address 128.221.1.249/24, plug the cable to Service LAN Port and try to ping 128.221.1.250 or 128.221.1.251 (the default service addresses for SPA and SPB). If this works you can browse to http://128.221.1.250 and try with the default access credentials i.e. (admin/password). If this doesn't work out for you then you will need to create a PPP Connection to either of the SP.



Refer: How to connect to a Clariiion through PPP Connection

Ankit Mehta

0 Kudos
Highlighted
5 Rhenium

Re: Setup of cx-480

Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.

glen

0 Kudos