This post is more than 5 years old
196 Posts
0
416
Unisphere Anlayzer
When you open a archive nar file is there a way to mass deselect all luns, enclosures and drives under the lun tab? I can do a cnt a to select all but it wont deselect all check marks.
Kumar_A
727 Posts
0
January 15th, 2011 20:00
In the second screenshot that you have attached, there is an checkbox called "Initially check all tree objects". It is selected by default. This is the reason why you see all the objects selected when you open the NAR file (third screenshot).
If you deselect the option "Initially check all tree objects", none of the objects would be selected when you open an archive NAR file.
Kumar_A
727 Posts
1
January 14th, 2011 13:00
You can change your settings (customize option in Unisphere) to say that when you open the archive file, nothing should be selected. I think that is what you are looking for.
Letbetterp
196 Posts
0
January 14th, 2011 17:00
I use open archive and select the nar file to view performance detail.
Am I in the ballpark
Every time I select this option this is what I am getting as default.
Letbetterp
196 Posts
0
January 15th, 2011 20:00
That was right in front of my face, man I kind of feel like a clown
I am trying to have a equal load on spa and spb, they have about the same number of spindles and luns on A and B. But the load during the day and at nightly backup is not even across both sp’s.
Thanks for your help!