Unsolved
This post is more than 5 years old
2 Posts
0
1558
VSPEX BLUE UPGRADE TO VXRAIL
Hi, I am doing an upgrade of a VSPEX BLUE Appliance to VXRAIL....I have already done setup of Vxrail Build server a VM that I will use to build the VSPEX blue nodes.
My main challnece is the VXRAIL Build server is not able to communicate to the VSPEX blue through the specified BMC ports
Keeps registering "could not access BMC ports of each node (4)"
But from the webpage I am able to see the BMC ports GUI once i type BMC port IP address.
Kindly advise how to come out of this issue and be able to upgrade my VSPEXBLUE appliance without any of these issues.
kelleg
4.5K Posts
0
May 19th, 2017 08:00
Hello - this is the CLARiiON customer support forum, you need to post your question in the VPLEX forum:
VPLEX
glen
HyperConverge
18 Posts
0
May 20th, 2017 19:00
Hi Kolouch,
Have you set the BMC ports to receive DHCP request. Set it to use DHCP and once your Mobile build server is powered on, it has a DHCP service inside which will provide IP to all nodes. Then the Build process will begin.