Unsolved
This post is more than 5 years old
33 Posts
0
404
Zone Luns Correctly
I have a CX4-120 runnibg VDI and standard virtual servers (on seperate clusters)
Can any one advise how to determine either in navisphere or on vmware vi client to determine that the Zoning of LUNs properly configured to the appropriate device. I am trying to ensure that for all ESX hosts in a DRS cluster/vMotion scope I can verify that the appropriate initiators and targets are zoned correctly according to EMC/VMWare best practice
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
September 19th, 2012 03:00
it depends how you have your hosts zonned to the array, IE
HBA1 - SPA0 /SPB3
HBA2 - SPB0/SPA3
if you have something like this, then when you look in Connectivity Status you should see 4 logged-in and registered initiators. Now you login to vSphere Client, go to Configuration, Storage, Devices. Select a device and click Manage Paths. The number of paths you see should correspond with number of paths you saw in Connectivity Status on Clariion.