yaribhas
2 Iron

adding clariions to domain

Jump to solution

I am trying to add 3 clariions to the same domain so I can get to all three from once place.

We have 3 CX4's with two running on 4.30.*******.511 and the other running on 4.30.*********.509

I have tried to add .509 to .511, .511 to .509 and .511 to .511 with no luck.

I get a "Out of Bounds" pop up window. Not sure why the error.

Thanks,

Labels (1)
Tags (4)
0 Kudos
1 Solution

Accepted Solutions
kenn2347
3 Silver

Re: adding clariions to domain

Jump to solution

Yes,  there is a Unisphere Client and Server program.  Just use the client.  I think it works better then using the web browser.  Little more responsive.

I dont know if your a partner?  not sure where to get it if you are not.

0 Kudos
7 Replies
kenn2347
3 Silver

Re: adding clariions to domain

Jump to solution

So you pick your Highest CX4 model and under domains, you try to add the ip addresses of the other CX4 arrays?  Does it prompt you for credentails?

Are you using the Unisphere client or doing this thru the browser?

0 Kudos
yaribhas
2 Iron

Re: adding clariions to domain

Jump to solution

So you pick your Highest CX4 model and under domains, you try to add the ip addresses of the other CX4 arrays?  Does it prompt you for credentails?

Are you using the Unisphere client or doing this thru the browser?

yes I choose the CX4-480 and tried to add the 120's to it.

Entered the ip address and it asked me for login credentials after 2-3 minutes I get the "out of bounds" pop up window.

I am using the browser? Is the client available on Powerlink? I did not know it existed. I'll look and try it from there.

0 Kudos
Highlighted

Re: adding clariions to domain

Jump to solution

Use the Higest version of Flare Code running CX and access the Unisphere from that

On the domain click and click fopr more clariions

Add the Clariion SP IP one by one

then you will be prompted for the login cred

add them from there we should be able to access all.

kenn2347
3 Silver

Re: adding clariions to domain

Jump to solution

Yes,  there is a Unisphere Client and Server program.  Just use the client.  I think it works better then using the web browser.  Little more responsive.

I dont know if your a partner?  not sure where to get it if you are not.

0 Kudos
yaribhas
2 Iron

Re: adding clariions to domain

Jump to solution

Thanks for your help.. We have some firewall ports blocked internally so I have put in the request to open them.

I downloaded the client. Still have to install it.

0 Kudos
yaribhas
2 Iron

Re: adding clariions to domain

Jump to solution

And I work for a customer and was able to download it.

0 Kudos
Kamala Kannan
1 Nickel

Re: adding clariions to domain

Jump to solution

Hi

Can you let me know what are the ports you opened. even we have same problem.

Regards

Kamal

0 Kudos