This post is more than 5 years old
38 Posts
0
2855
the clariion storage system user is unauthenticated
HI
We have a Clariion Cx4 and Celerra ns-960 environment. We recently changed the admin password on Unsiphere and the Celerra Control stations. However, on Unisphere the Celerra System Information status shows "the clariion storage system user is unauthenticated"
What else needs to be completed to fix this issue?
Thanks
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
2
March 14th, 2014 04:00
that is exactly what i wanted to see and expected, yes you need to run that command to update the local nasdb with the new Unisphere credentials. This procedure is non-disruptive.
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
1
March 11th, 2014 07:00
what do you see if you run this command:
nas_storage -c -a
sameek
60 Posts
0
March 12th, 2014 04:00
Hi
Also Check the KB Article 70441, This may help you.
Thanks
Sameeksha
james0607
38 Posts
0
March 14th, 2014 04:00
Hi Dynamox
Thanks for the reply. When I run “nas_storage-c –a” it gives me the following:
Error 13422231564: Invalid credentials for the storage array
Do I have run “nas_storage -modify id=1 –security” on our two Celerra NS-960 in order to update the security on Unisphere?
If I have to run the above command is it disruptive or cause the users to experience any issues?
Thanks Again
J
kelleg
4.5K Posts
0
March 17th, 2014 11:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen