Start a Conversation

This post is more than 5 years old

Solved!

Go to Solution

982

August 15th, 2013 13:00

Celerra NS700 final code

What was the latest dart and flare code version for the NS700 at the hardware was end of life?

1 Rookie

 • 

20.4K Posts

August 15th, 2013 14:00

NAS Connectivity 

  
No.  Storage Array  Storage Operating Environment  Interoperable Storage Operating Environment  Comments 
  EMC Celerra NS700    EMC DART: 5.4.19.4, 5.4.20, 5.4.21.4, 5.4.22, 5.4.23, 5.4.25, 5.4.26, 5.4.27.2, 5.5.24    EMC FLARE 02.16    See2, 4  
  EMC Celerra NS700    EMC DART: 5.5.19.4, 5.5.20.1, 5.5.21.4, 5.5.22.2, 5.5.23.2, 5.5.24, 5.5.25, 5.5.26, 5.5.27, 5.5.28, 5.5.29, 5.5.30    EMC FLARE 02.19    See2, 4  
  EMC Celerra NS7001     EMC DART 5.4.18    EMC FLARE 02.16    See2, 3, 4  
  EMC Celerra NS7001     EMC DART: 5.4.14, 5.4.15, 5.4.17    EMC FLARE 02.16    See2, 3  
  EMC Celerra NS7001     EMC DART: 5.4.18, 5.4.19.4, 5.4.20, 5.4.21.4, 5.4.22, 5.4.23, 5.4.24.8, 5.4.25, 5.4.26, 5.4.27.2, 5.4.29, 5.4.30    EMC FLARE 02.19    See2, 4  
  EMC Celerra NS7001   EMC DART: 5.4.31, 5.5.31, 5.5.32, 5.5.33, 5.5.34, 5.5.35, 5.5.36.2, 5.5.37, 5.5.38, 5.5.39, 5.5.41, 5.5.42, 5.6.36, 5.6.37, 5.6.38, 5.6.39, 5.6.40, 5.6.42, 5.6.43, 5.6.44, 5.6.45, 5.6.46, 5.6.47, 5.6.48, 5.6.49, 5.6.50, 5.6.51, 5.6.52    EMC FLARE 02.24    See2, 4, 5, 6  
  EMC Celerra NS7001   EMC DART: 5.4.31, 5.5.31, 5.5.32, 5.5.33, 5.5.35, 5.5.36.2, 5.5.37, 5.5.38, 5.5.39, 5.5.40, 5.5.41, 5.5.42, 5.6.36, 5.6.37, 5.6.38, 5.6.39, 5.6.40, 5.6.42, 5.6.43, 5.6.44, 5.6.45, 5.6.46, 5.6.47, 5.6.48, 5.6.49, 5.6.50, 5.6.51, 5.6.52    EMC FLARE 02.26    See2, 4, 5, 6  
  EMC Celerra NS7001     EMC DART: 5.5.19.4, 5.5.20.1, 5.5.21.4, 5.5.22.2, 5.5.23.2, 5.5.25    EMC FLARE 02.16    See2, 4  
  EMC Celerra NS7001     EMC DART: 5.5.26, 5.5.27    EMC FLARE 02.24    See2, 4, 7  
10    EMC Celerra NS7001     EMC DART: 5.5.28, 5.5.29, 5.5.30    EMC FLARE 02.24    See2, 4, 5, 7  
   1.      NS700 integrated back end is NS700-AUX, based on CX700. 
   2.      CLARiiON Fibre Channel drives
* Drives: 36GB (10K & 15K), 73GB (10K & 15K), 146GB (10K & 15K), 300GB (10K & 15K)
* Drives: 450GB (15K) Minimum Flare is 02.26.xxx.5.014
* RAID 5 (4+1 or 8+1)
* RAID 1
* 1 hot spare per 30 drives
* Min 6 drives (RAID 5 4+1 and 1 spare) 
   3.      CLARiiON ATA drives
* Drives: 250GB & 320GB (5400 RPM), 250GB (7200 RPM)
* RAID 5 (6+1 only)
* RAID 3 (4+1 or 8+1)
* 1 hot spare per 15 drives
* First shelf must be 10K or 15K Fibre Channel 
   4.      CLARiiON ATA drives
* Drives (5400 RPM): 250GB & 320GB,
* Drives (7200 RPM): 250GB & 500GB
* Drives (7200 RPM): 750GB
* Drives (7200 RPM) 1TB (requires a Flare 2.24 patch)
* 1TB drives not supported on CX400/CX600.
* RAID 5 (6+1 only)
* RAID 3 (4+1 or 8+1)
* 1 hot spare per 15 drives
* First shelf must be 10K or 15K Fibre Channel 
   5.    An infrequent compatibility issue has been found with a combination of Dart 5.6 and Flare R24 in production environments. While supported, this combination should be considered only as an interim upgrade step and Flare R26 is the recommended minimum Flare release for Dart 5.6 deployments. 
   6.      RAID 6 in Flare 26 is not supported in NAS release 5.4.x.x. RAID 6 support is available with NAS release 5.5.31.x. 
   7.      Supported RKM appliance build version is:
RKM_PROD_2_7_SP1 _EST_20100616182501
RKM Appliance Hotfix 2_7_SP1: KMA-87

1 Rookie

 • 

20.4K Posts

August 15th, 2013 14:00

see attached for EOSL

1 Attachment

12 Posts

August 16th, 2013 11:00

Thanks Dyanmox

No Events found!

Top