Unsolved
This post is more than 5 years old
20 Posts
0
587
How to do Network Teaming in celerra manager for NX4
How to configure teaming on celerra manager for NX4. If a blade have 4 Network ports
Unsolved
This post is more than 5 years old
20 Posts
0
587
How to configure teaming on celerra manager for NX4. If a blade have 4 Network ports
Top
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
0
September 9th, 2010 09:00
start out by reading documenet titled "Configuring and Managing Celerra Network High Availability", it's available on powerlink
Rainer_EMC
8.6K Posts
0
September 9th, 2010 10:00
Hi,
please see the
Configuring and Managing EMC Celerra Network High Availability
manual on your doc CD or available from Powerlink – it explains both the concepts and the operation
Rainer
Rich_Bai
25 Posts
0
September 13th, 2010 23:00
As the replies refer, are you able to get the document from Powerlink? Is the document helpful?
If so, please mark the question as "Answered". Your response and feedback is appreciated.
Thanks!