This post is more than 5 years old
82 Posts
0
711
NS480 back-end LUN creation script
I forgot to document this when our PS guy showed me last time
basically there was a script you can run on the NS480 control station that will carve up storage on the back-end CX4 to your specification without having to
go through Navisphere, does anyone know where this script is located?
Thanks
nandas
1.5K Posts
0
April 9th, 2010 12:00
You may be looking for the /nas/sbin/setup_clarrionscript (run /nas/sbin/setup_clariion -init from root). You may also do the same using the Celerra Manager - Celerras > Storage > System > Configure.
Please refer to the following link for more details on Configuring unused disks - this is available on the Powerlink under Celerra Tools section -
http://corpusweb130.corp.emc.com/ns/common/post_install/Config_storage_integrated.htm
Thanks,
Sandip
jliu2
82 Posts
0
April 9th, 2010 12:00
sweet thanks man
Rainer_EMC
8.6K Posts
0
April 9th, 2010 13:00
As an alternative to the setup_clariion skript you can use the Storage Provisioning Wizard available through CSA or the Celerra Manager GUI
its more flexible than setup_clariion and also works if you have an FC option installed (whereas setup_clariion doesnt)
Rainer