Unsolved
This post is more than 5 years old
6 Posts
0
1363
Problem with sendind SNMP trap from Celerra
Hi,
I have problems with configuration of SNMP on Celerra when using specific port (12101) for sending SNMP traps. When trying to use below command:
/nas/sbin/nas_snmptrap /nas/site/trap.cfg -m /nas/sys/emccelerra.mib -r 1 -f 64 -i 5 -s 7 -d "test SNMP traps"
we get:
Could not resolve name: Temporary failure in name resolution
error in sending out snmp pdu
But when I removed port (12101) from /nas/site/trap.cfg, test trap was send succesfully.
/nas/site/trap.cfg:
snmpmanager xx.xx.xx.xx:12101 ; communityname xxx
Any suggestions how to proceed?
KR,
Mariusz
Peter_EMC
674 Posts
0
October 12th, 2015 23:00
I do not think, specifing a port is possible in the trap.cfg config file
brownking
6 Posts
0
October 27th, 2015 06:00
Hi,
I thought so too, but one of our Customers uses that kind of configuration (specified port is given in trap.cfg) and it works. Any other ideas?
Thanks in advance
KR,
Mariusz
Rainer_EMC
8.6K Posts
0
October 27th, 2015 14:00
Well – there is always the option of opening a service request
brownking
6 Posts
0
October 28th, 2015 03:00
Yeah, but we don't have an active support for that box
KR,
Mariusz