Unsolved
This post is more than 5 years old
223 Posts
0
801
Sharedup with 2 or more CIFS Servers
Hello,
I´m doing a migration from some existing Windows File Servers to a NS120.
I copied all the data with richcopy and did the last sync and the security transfer with emcopy.
Now I want to use sharedup to replicate the share to the NS120 which works fine.
I only have one problem; most of the shares are binded to 2 or more Celerra CIFS Servers. When I use sharedup with the following option the share is only mounted to one CIFS Server:
sharedup.exe \\soure \\destination ALL /P \nas_fs /SD /FO:dump.txt
sharedup.exe \\source \\destination ALL /SD /FI:dump.txt
When I do this for every destinatino server I have one share listed more times in the share windows
For example.
share1 filer1
share1 filer2
sahre1 filer3
Can I use sharedup with more destination servers, so that I have only one line per share
for example:
share1 filer1, filer2, filer3
Rainer_EMC
8.6K Posts
0
July 7th, 2011 10:00
did you find a solution ?
I would be nice to share for the benefit of others
Rainer
Druehl1
223 Posts
0
July 8th, 2011 00:00
Hi,
I´m sorrry but i didn´t find a solution with sharedup.
My workaround was to make one CIFS server on the Celerra and give this "original" CIFS server some aliases with the name of the other CIFS servers we needed. Although I gave the original CIFS server more IP´s, respectively the IP´s of the other needes CIFS servers.
Looks like this:
share1 --> filer1 / alias filer2 / alias filer3
So share1 is accessable from filer1/2/3.
This works fine so far.
Regards
David
Rainer_EMC
8.6K Posts
0
July 8th, 2011 06:00
Thanks for the feedback
Rainer