This post is more than 5 years old
259 Posts
1
1346
Unisphere and Lun Migration
Is it possible to perform a lun migration of a celerra lun using Unisphere tools to perform the migration?
for example, clariion lun 50 which maps to nas disk d8, can I perform the operation to right-click / migrate lun 50 to a same size lun of the same disk type? Ie: lun migrate lun 50 which is Raid5 to a new lun configured as raid6, same size?
I'm not sure if I should ask this question in the Navisphere/Unisphere forum or in the Celerra forum.
thanks.
Rainer_EMC
8.6K Posts
1
March 20th, 2011 14:00
DONT use LUN migration on LUNs that are used for NAS file systems – especially when source and target have a different storage profile (would be in in different system pools)
I would suggest to use Replicator instead
jimkunysz
259 Posts
0
March 18th, 2011 10:00
ok, thx. As I assumed but it would be a really nice feature/capability.
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
1
March 18th, 2011 10:00
i remember earlier discussions were that this process was either not supported or performed under EMC supervision.
TimH
100 Posts
0
May 6th, 2015 11:00
Agreed!