Highlighted
2 Bronze

Re: After add disk, how to config the non allocated space to Tier 1 Storage?

SCv2000,

12 drives

0 Kudos
Highlighted
Moderator
Moderator

Re: After add disk, how to config the non allocated space to Tier 1 Storage?

Hello Fung20200619,

You added 12 drives? How many drives were in your system prior to adding drives to it?

DELL-Sam L
Dell | Social Outreach Services - Enterprise
Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device! (iOS, Android, Windows)

0 Kudos
Highlighted
2 Bronze

Re: After add disk, how to config the non allocated space to Tier 1 Storage?

Sorry, before have 10drive. (1 spare)

after add 2 drive. like I upload the pics before.

0 Kudos
Highlighted
2 Bronze

Re: After add disk, how to config the non allocated space to Tier 1 Storage?

Fung20200619_0-1593415796465.png

Fung20200619_1-1593415823995.png

How can i set the redundant allocated space to 60.04TB? Because i had add 2 drive like the pic.

0 Kudos
Highlighted
Moderator
Moderator

Re: After add disk, how to config the non allocated space to Tier 1 Storage?

Hello Fung20200619,

I want to make sure that you have done the following steps in this order.

  1. Add the 2 Disk to the blank slot.
  2. Select a Storage Center from the Storage view.
  3. Click the Storage tab.
  4. Select the Disks node.
  5. Click Scan for Disks
  6. Click Manage Unassigned Disks.
  7. Select Disk Folder "7K"
  8. Click change 2 new disks to assign.
  9. Click Rebalance

Once the rebalances finishes then you should see the new space on the tier.

DELL-Sam L
Dell | Social Outreach Services - Enterprise
Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device! (iOS, Android, Windows)

0 Kudos
2 Bronze

Re: After add disk, how to config the non allocated space to Tier 1 Storage?

Fung20200619_0-1593488064279.pngFung20200619_1-1593488068468.pngFung20200619_2-1593488077697.png

 i think i had done all the step, but the Rebalance RAID progress very long time, i had wait that for 2 week, and it still show 99%

Fung20200619_0-1593492383887.png

so, i stop it, and should me click ok shown in pic?

 

0 Kudos
Highlighted
Moderator
Moderator

Re: After add disk, how to config the non allocated space to Tier 1 Storage?

Hello Fung20200619,

I am going to send you a private message, & if you can enable secure console and provide me with your controller serial# so I can look into your system.

DELL-Sam L
Dell | Social Outreach Services - Enterprise
Download the Dell Quick Resource Locator app today to access PowerEdge support content on your mobile device! (iOS, Android, Windows)

0 Kudos