This post is more than 5 years old
614 Posts
0
8203
Brocade 300 snmp
Hello,
I am trying to change the snmp string to a RO public string on a pair of old brocade 300 switches running 7.0.4. Does anyone have any guidelines for this. My only option is using CLI.
Thank you!
Admingirl
Ed Schulte
143 Posts
0
October 11th, 2017 07:00
Hello,
The SNMP settings can be changed with the snmpconfig command. If you run the command on without argument you can see what option you have.
It has various arguments you can use for setting al sort of SNMP settings. If you use the --set snmpv1 argument, you can change the RO settings.
>>>>>>>>>>>>>>
Example:
DS_300B:admin> snmpconfig --set snmpv1
SNMP community and trap recipient configuration:
Community (rw): [Secret C0de]
Trap Recipient's IP address : [0.0.0.0]
Trap recipient Severity level : (0..5) [4]
Trap recipient Port : (0..65535) [162]
Community (rw): [OrigEquipMfr]
Trap Recipient's IP address : [0.0.0.0]
Community (rw): [private]
Trap Recipient's IP address : [0.0.0.0]
Community (ro): [public]
Trap Recipient's IP address : [0.0.0.0]
Community (ro): [common]
Trap Recipient's IP address : [0.0.0.0]
Community (ro): [FibreChannel]
Trap Recipient's IP address : [0.0.0.0]
DS_300B:admin>
>>>>>>>>>>>>>>
Regards,
Ed