Highlighted
GuillermoGCG
1 Copper

CMCNE to integrate with CISCO ACS5.2

Jump to solution

Hi,

I'm trying to use a TACACS solution to authenticate users on the CMCNE tool.

When I test the connection with the ACS, I have an error saying that the authorization is failed.

On the ACS side, I only see that the authentication is successful.

Does anybody know if there are specific configuration to do on the ACS side? Shell profile for example, which kind of attributes?

Regards,

Guillermo

Labels (2)
0 Kudos
1 Solution

Accepted Solutions
8 Krypton

Re: CMCNE to integrate with CISCO ACS5.2

Jump to solution

Hi,

Suggest to open a SR with support, to get the issue looked at. They might be able to escalate it further if the environment is supported / compatible etc.

That would give you the best solution.

The CMCNE guide 14.4.1 on page 710 and 711, shows the steps how to configure from the CMCNE side of things.

Regards,

Ed

0 Kudos
1 Reply
8 Krypton

Re: CMCNE to integrate with CISCO ACS5.2

Jump to solution

Hi,

Suggest to open a SR with support, to get the issue looked at. They might be able to escalate it further if the environment is supported / compatible etc.

That would give you the best solution.

The CMCNE guide 14.4.1 on page 710 and 711, shows the steps how to configure from the CMCNE side of things.

Regards,

Ed

0 Kudos