Highlighted
grant5
1 Nickel

migrate from DAS to switch environment

Jump to solution

Dear all

we have to migrate a Hyper-V Cluster with 2 nodes  from direct attached connectivity (to a VNX storage) to SAN (switched) environment that includes 2 new FC switches.

Which steps we have to follow for this migration?

Thanks and Regards

George

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
ddeepak
1 Nickel

Re: migrate from DAS to switch environment

Jump to solution

Verify the compatibility of the hba fw and the FOS version in the switches. Configure the switch parameters, port, connect one switch at a time, create zones, activate, refresh paths at host end and verify, do it on the other side again and then you should be good to go.

0 Kudos
4 Replies
ddeepak
1 Nickel

Re: migrate from DAS to switch environment

Jump to solution

Are you still looking for answers.? its all the basic stuff..

0 Kudos
grant5
1 Nickel

Re: migrate from DAS to switch environment

Jump to solution

Hi

i would appreciate if you can give me a quick reply

BR

G

0 Kudos
ddeepak
1 Nickel

Re: migrate from DAS to switch environment

Jump to solution

Verify the compatibility of the hba fw and the FOS version in the switches. Configure the switch parameters, port, connect one switch at a time, create zones, activate, refresh paths at host end and verify, do it on the other side again and then you should be good to go.

0 Kudos
grant5
1 Nickel

Re: migrate from DAS to switch environment

Jump to solution

THANKS A LOT