I lost access to the controller.
I try to act according to instructions:
"You must use a serial connection for the following procedure to work:
Establish a PPP connection to one of the storage processors (SPs).
Point your browser to this URL: http: // 192.168.1.1/setup
Click "Add a New Account."
Enter a user name and in the New Password Verification text box, type in the password again.
Click "Restart Management Server."
but there is a problem at the stage of creating a PPP connection.
It does not pass the test username and password.
What username and password Standard is on the PPP connection?
nothing has come 😞
Solved! Go to Solution.
What you were missing is that to access the PPP connection your password is incorrect. It should be clariion/ clariion! & that will make the connection. I see that you were able to figure it out but wanted to put this out there just in case anyone else needs it.
Please let us know if you have any other questions.
I also have the same issue above, except that clariion / clariion! also does not work.
The connection goes from dialing --> opening port --> Verifying username and password --> ...nothing (error 721) The computer did not respond. Any ideas?
Hi, i am working to resume funcionality of my Dell Emc X1E +. This device was power off for many years and never worked. I can observe that any sps are blinking amber led every 4 second indicating bios activity (from troubleshooting guide).
I have problem to estabilsh ppp connection because i did'nt find any Dell's official serial cable. I have question about cache battery. I did'nt find inside sps board and power supply.
Thanks in advance