Unsolved
12 Posts
1
5727
How to set up a static IP (solution), network settings
'lo folks,
when deploying the OME it looks like we cannot enter a static IP address because if we only use the up and down arrow, there is no way to change the IP fields.
is the answer . it will move you to the correct field then you can set up whatever you want.
This could be explained as it is not intuitive.
Uncheck DHCP if necessary
Use to move to the IP field
Use left/right arrow to move into the field. Set up the static information
Apply
DELL-Chris H
Moderator
Moderator
•
8.4K Posts
0
June 11th, 2018 08:00
Blue_Frog,
Thank you for helping others with identifying the proper navigation steps, we appreciate your support. assistance, and feedback.
Thank you
DELL-Rob C
2.8K Posts
0
June 13th, 2018 08:00
Thanks for the post. I sent it along to the right folks for review.
Regards,
Rob
blue_frog
12 Posts
0
June 13th, 2018 21:00
Hi,
just as a quick follow-up, using tab is kind of usual in the linux world.
What took me off guard is the fact that the static IP fields are colored pink, + the fact that up/down arrows don't move the cursor into those fields led me to think for a while that we couldn't do that.
DELL-Rob C
2.8K Posts
0
June 14th, 2018 07:00
Ok, got it.
Thanks for this additional context--passing this along too.
thx!
Rob
Arturo RM
1 Message
0
January 17th, 2022 07:00
could you help me to know how to enter that menu