Good Day Abhijit,
We're attempting to push a fresh install of the Linux OMSA agent to a server but the client is responding with the following error: "Results: omexec must be installed on the remote node for the task. Ensure remote node requirements are met before executing the task."
As far as I've been told, the pre-reqs listed under "Install OMSA Dependencies" have been completed; we've also turned off the local firewall to rule that out. What else are we missing?
omexec is part of Pre-install package and it needs the below RPMS. Can you grep each rpm and verify these RPMS and the dependent RPMS are installed correctly. Note that these are 32-bit RPMS.
Good morning Abhijit,
My Nix admin sent back the following as installed:
All versions installed are x86_64 and the install of compat-libstdc++-33.i686 also installed the glibc and libgcc i686 versions.
I'm still getting the same omexec error. Are these the correct versions?
Much obliged (and Happy Friday),
Hi followed this guide, I discovered and inventoried a C6145 and R815 servers (RHEL 6). However, I found that in OME, all processor and memory info are missing (they present in server's OMSA though).
Am I missing something?
Be sure your firewall is off or allows snmp access. In our testing, we could run snmpwalk against localhost, but remote snmp queries were failing. We spent several hours looking at our monitor software configurations and our snmpd.conf file for errors before realizing it was a firewall issue.
Could you make an manuel for OpenManage without essentials? am having a hard tim getting it to work...
Useing ubuntu server 16.04
Also dell server manager says:
Server administrator SNMP component is not installed.
while i used srvadmin-all for installing , thats a bit strange...
i use snmp v3 which works fine