Unsolved
This post is more than 5 years old
5 Practitioner
•
107 Posts
0
2658
Setup Multiple idrac7/8 to send traps to the OME Server
Team,
I looking for documentation about "Setup Multiple idrac7/8 to send traps to the OME Server".
I found this script :
racadm ‐r %1 ‐u %2 ‐p %3 config ‐g cfgipmilan ‐o cfgipmilanalertenable 1
racadm ‐r %1 ‐u %2 ‐p %3 eventfilters set ‐c idrac.alert.all ‐a none ‐n snmp
racadm ‐r %1 ‐u %2 ‐p %3 set idrac.snmp.alert.1.enable 1
racadm ‐r %1 ‐u %2 ‐p %3 set idrac.snmp.alert.1.destaddr %4
But he doesn't work with new Firmware 2.xx.xx !
It is possible to update documentation "How to configure iDRAC7 Alert Actions via OME" or to propose workaround ? Many Thx
DELL-Martijn G
291 Posts
2
June 1st, 2016 08:00
Hi,
Have a look at this one.
1 Attachment
SNMP Script v1.0.rar
DELL-Martijn G
291 Posts
0
June 1st, 2016 09:00
You are welcome.
Geek_Mika
5 Practitioner
5 Practitioner
•
107 Posts
0
June 1st, 2016 09:00
Fantastic !! Many Thx ! Documentation + script is very helpful !
TechnicalEngineeringKLM
70 Posts
0
June 2nd, 2016 00:00
Hey Martijn,
don't want to be a wiseguy but i've adjusted your script a bit for the use of iDRAC 8 new syntax.
Hmm just added the commands as far as i knew them. Just commeent them out.
Perhaps it's of use to someone.
greetz Peter
1 Attachment
SNMP.rar
GeertC
1 Rookie
1 Rookie
•
70 Posts
0
June 6th, 2017 04:00
Does this mean that you have to create 2 command line tasks in OME?
one for iDRACs with older firmware and one for iDRACs with the latest firmware version?
GeertC
1 Rookie
1 Rookie
•
70 Posts
0
June 6th, 2017 06:00
[View:/cfs-file/__key/communityserver-discussions-components-files/4494/7652.SNMP_5F00_v1.2.cmd.zip:550:0]
changes i have made
detect if an older iDRAC or newer iDARC is used and adjust command line options according