Start a Conversation

Unsolved

This post is more than 5 years old

4732

December 19th, 2017 11:00

2 Graphics Cards in Dell optiplex 7010 MT

Hi there,

I have a Optiplex 7010MT with a new power supply. It is possible to install 2 pci-e graphics cards? The socket second socket it there but can I use that one for a second graphic card?

2.3K Posts

December 19th, 2017 14:00

Yes and no.  The black PCIe according to the manual is 'wired' as a 4x and not a 16x so if the machine will allow you to put in a graphics card and run it, it will only be about 25 percent useful.  

3 Posts

December 19th, 2017 21:00

okay this answer is enough for me. I need it only to wire more monitors. I don't need the "power" of the cards

3 Posts

December 19th, 2017 21:00

Thank you. Is the board a normal atx form factor so that I can put it in an other case?

2.3K Posts

December 20th, 2017 09:00

I'm not exactally sure.  Sometimes Dell uses custom form factors and sometimes they do not.  Its also possible the mount points of the motherboard would be different even if the size of the board is 'standard'.  On top of that, you may run into the pinouts on the motherboard being different then what is in the case.  

No Events found!

Top